[PATCH 4/9] powerpc: more cleanup of powerpc/kernel
Stephen Rothwell
sfr at canb.auug.org.au
Fri Sep 30 23:55:17 EST 2005
Update head_64.S from arch/ppc64
Remove arch/ppc/kernel/fpu.S
Signed-off-by: Stephen Rothwell <sfr at canb.auug.org.au>
---
arch/powerpc/kernel/head_64.S | 9 ++-
arch/ppc/kernel/Makefile | 1
arch/ppc/kernel/fpu.S | 133 -----------------------------------------
3 files changed, 7 insertions(+), 136 deletions(-)
delete mode 100644 arch/ppc/kernel/fpu.S
--
Cheers,
Stephen Rothwell sfr at canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
ee400b63f37120987bd12a2fada850c6212d7563
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -1253,7 +1253,7 @@ unrecov_slb:
*
* On iSeries, the hypervisor must fill in at least one entry before
* we get control (with relocate on). The address is give to the hv
- * as a page number (see xLparMap in LparData.c), so this must be at a
+ * as a page number (see xLparMap in lpardata.c), so this must be at a
* fixed address (the linker can't compute (u64)&initial_stab >>
* PAGE_SHIFT).
*/
@@ -1364,6 +1364,7 @@ _STATIC(__start_initialization_iSeries)
addi r2,r2,0x4000
bl .iSeries_early_setup
+ bl .early_setup
/* relocation is on at this point */
@@ -1970,20 +1971,22 @@ _GLOBAL(hmt_start_secondary)
blr
#endif
-#if defined(CONFIG_KEXEC) || (defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES))
+#if defined(CONFIG_KEXEC) || defined(CONFIG_SMP)
_GLOBAL(smp_release_cpus)
/* All secondary cpus are spinning on a common
* spinloop, release them all now so they can start
* to spin on their individual paca spinloops.
* For non SMP kernels, the secondary cpus never
* get out of the common spinloop.
+ * XXX This does nothing useful on iSeries, secondaries are
+ * already waiting on their paca.
*/
li r3,1
LOADADDR(r5,__secondary_hold_spinloop)
std r3,0(r5)
sync
blr
-#endif /* CONFIG_SMP && !CONFIG_PPC_ISERIES */
+#endif /* CONFIG_SMP */
/*
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -39,6 +39,7 @@ endif
# These are here while we do the architecture merge
vecemu-y += ../../powerpc/kernel/vecemu.o
vector-y += ../../powerpc/kernel/vector.o
+fpu-y += ../../powerpc/kernel/fpu.o
else
obj-y := entry.o irq.o idle.o time.o misc.o \
diff --git a/arch/ppc/kernel/fpu.S b/arch/ppc/kernel/fpu.S
deleted file mode 100644
--- a/arch/ppc/kernel/fpu.S
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * FPU support code, moved here from head.S so that it can be used
- * by chips which use other head-whatever.S files.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/config.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/cache.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-/*
- * This task wants to use the FPU now.
- * On UP, disable FP for the task which had the FPU previously,
- * and save its floating-point registers in its thread_struct.
- * Load up this task's FP registers from its thread_struct,
- * enable the FPU for the current task and return to the task.
- */
- .globl load_up_fpu
-load_up_fpu:
- mfmsr r5
- ori r5,r5,MSR_FP
-#ifdef CONFIG_PPC64BRIDGE
- clrldi r5,r5,1 /* turn off 64-bit mode */
-#endif /* CONFIG_PPC64BRIDGE */
- SYNC
- MTMSRD(r5) /* enable use of fpu now */
- isync
-/*
- * For SMP, we don't do lazy FPU switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another. Instead we call giveup_fpu in switch_to.
- */
-#ifndef CONFIG_SMP
- tophys(r6,0) /* get __pa constant */
- addis r3,r6,last_task_used_math at ha
- lwz r4,last_task_used_math at l(r3)
- cmpwi 0,r4,0
- beq 1f
- add r4,r4,r6
- addi r4,r4,THREAD /* want last_task_used_math->thread */
- SAVE_32FPRS(0, r4)
- mffs fr0
- stfd fr0,THREAD_FPSCR-4(r4)
- lwz r5,PT_REGS(r4)
- add r5,r5,r6
- lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- li r10,MSR_FP|MSR_FE0|MSR_FE1
- andc r4,r4,r10 /* disable FP for previous task */
- stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
- /* enable use of FP after return */
- mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
- lwz r4,THREAD_FPEXC_MODE(r5)
- ori r9,r9,MSR_FP /* enable FP for current */
- or r9,r9,r4
- lfd fr0,THREAD_FPSCR-4(r5)
- mtfsf 0xff,fr0
- REST_32FPRS(0, r5)
-#ifndef CONFIG_SMP
- subi r4,r5,THREAD
- sub r4,r4,r6
- stw r4,last_task_used_math at l(r3)
-#endif /* CONFIG_SMP */
- /* restore registers and return */
- /* we haven't used ctr or xer or lr */
- b fast_exception_return
-
-/*
- * FP unavailable trap from kernel - print a message, but let
- * the task use FP in the kernel until it returns to user mode.
- */
- .globl KernelFP
-KernelFP:
- lwz r3,_MSR(r1)
- ori r3,r3,MSR_FP
- stw r3,_MSR(r1) /* enable use of FP after return */
- lis r3,86f at h
- ori r3,r3,86f at l
- mr r4,r2 /* current */
- lwz r5,_NIP(r1)
- bl printk
- b ret_from_except
-86: .string "floating point used in kernel (task=%p, pc=%x)\n"
- .align 4,0
-
-/*
- * giveup_fpu(tsk)
- * Disable FP for the task given as the argument,
- * and save the floating-point registers in its thread_struct.
- * Enables the FPU for use in the kernel on return.
- */
- .globl giveup_fpu
-giveup_fpu:
- mfmsr r5
- ori r5,r5,MSR_FP
- SYNC_601
- ISYNC_601
- MTMSRD(r5) /* enable use of fpu now */
- SYNC_601
- isync
- cmpwi 0,r3,0
- beqlr- /* if no previous owner, done */
- addi r3,r3,THREAD /* want THREAD of task */
- lwz r5,PT_REGS(r3)
- cmpwi 0,r5,0
- SAVE_32FPRS(0, r3)
- mffs fr0
- stfd fr0,THREAD_FPSCR-4(r3)
- beq 1f
- lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- li r3,MSR_FP|MSR_FE0|MSR_FE1
- andc r4,r4,r3 /* disable FP for previous task */
- stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
- li r5,0
- lis r4,last_task_used_math at ha
- stw r5,last_task_used_math at l(r4)
-#endif /* CONFIG_SMP */
- blr
More information about the Linuxppc64-dev
mailing list