[PATCH] PPC64 iSeries: cleanup iSeries_setup
Stephen Rothwell
sfr at canb.auug.org.au
Tue Mar 15 15:34:46 EST 2005
Hi Andrew,
This patch does some trivial cleanups on iSeries_setup.[ch]:
- eliminiate warning about iommu_init_early_iSeries not being
declared
- remove trailing whitespace
- change some functions to static
- remove defunct function declarations
Built and booted on iSeries.
Signed-off-by: Stephen Rothwell <sfr at canb.auug.org.au>
--
Cheers,
Stephen Rothwell sfr at canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
diff -ruNp linus-cleanup.1/arch/ppc64/kernel/iSeries_setup.c linus-cleanup.2/arch/ppc64/kernel/iSeries_setup.c
--- linus-cleanup.1/arch/ppc64/kernel/iSeries_setup.c 2005-03-06 07:08:24.000000000 +1100
+++ linus-cleanup.2/arch/ppc64/kernel/iSeries_setup.c 2005-03-15 15:23:35.000000000 +1100
@@ -15,7 +15,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
+
#undef DEBUG
#include <linux/config.h>
@@ -39,6 +39,7 @@
#include <asm/mmu_context.h>
#include <asm/cputable.h>
#include <asm/sections.h>
+#include <asm/iommu.h>
#include <asm/time.h>
#include "iSeries_setup.h"
@@ -57,6 +58,7 @@
#include <asm/iSeries/iSeries_proc.h>
#include <asm/iSeries/mf.h>
#include <asm/iSeries/HvLpEvent.h>
+#include <asm/iSeries/iSeries_irq.h>
extern void hvlog(char *fmt, ...);
@@ -72,7 +74,6 @@ extern void ppcdbg_initialize(void);
static void build_iSeries_Memory_Map(void);
static void setup_iSeries_cache_sizes(void);
static void iSeries_bolt_kernel(unsigned long saddr, unsigned long eaddr);
-extern void iSeries_setup_arch(void);
extern void iSeries_pci_final_fixup(void);
/* Global Variables */
@@ -108,8 +109,8 @@ struct MemoryBlock {
* and return the number of physical blocks and fill in the array of
* block data.
*/
-unsigned long iSeries_process_Condor_mainstore_vpd(struct MemoryBlock *mb_array,
- unsigned long max_entries)
+static unsigned long iSeries_process_Condor_mainstore_vpd(
+ struct MemoryBlock *mb_array, unsigned long max_entries)
{
unsigned long holeFirstChunk, holeSizeChunks;
unsigned long numMemoryBlocks = 1;
@@ -154,7 +155,7 @@ unsigned long iSeries_process_Condor_mai
#define MaxSegmentAdrRangeBlocks 128
#define MaxAreaRangeBlocks 4
-unsigned long iSeries_process_Regatta_mainstore_vpd(
+static unsigned long iSeries_process_Regatta_mainstore_vpd(
struct MemoryBlock *mb_array, unsigned long max_entries)
{
struct IoHriMainStoreSegment5 *msVpdP =
@@ -246,7 +247,7 @@ unsigned long iSeries_process_Regatta_ma
printk(" Bitmap range: %016lx - %016lx\n"
" Absolute range: %016lx - %016lx\n",
mb_array[i].logicalStart,
- mb_array[i].logicalEnd,
+ mb_array[i].logicalEnd,
mb_array[i].absStart, mb_array[i].absEnd);
mb_array[i].absStart = addr_to_chunk(mb_array[i].absStart &
0x000fffffffffffff);
@@ -261,7 +262,7 @@ unsigned long iSeries_process_Regatta_ma
return numSegmentBlocks;
}
-unsigned long iSeries_process_mainstore_vpd(struct MemoryBlock *mb_array,
+static unsigned long iSeries_process_mainstore_vpd(struct MemoryBlock *mb_array,
unsigned long max_entries)
{
unsigned long i;
@@ -302,7 +303,7 @@ static void __init iSeries_parse_cmdline
*p = 0;
}
-/*static*/ void __init iSeries_init_early(void)
+static void __init iSeries_init_early(void)
{
DBG(" -> iSeries_init_early()\n");
@@ -355,7 +356,7 @@ static void __init iSeries_parse_cmdline
#ifdef CONFIG_SMP
smp_init_iSeries();
#endif
- if (itLpNaca.xPirEnvironMode == 0)
+ if (itLpNaca.xPirEnvironMode == 0)
piranha_simulator = 1;
/* Associate Lp Event Queue 0 with processor 0 */
@@ -385,21 +386,21 @@ static void __init iSeries_parse_cmdline
/*
* The iSeries may have very large memories ( > 128 GB ) and a partition
* may get memory in "chunks" that may be anywhere in the 2**52 real
- * address space. The chunks are 256K in size. To map this to the
- * memory model Linux expects, the AS/400 specific code builds a
+ * address space. The chunks are 256K in size. To map this to the
+ * memory model Linux expects, the AS/400 specific code builds a
* translation table to translate what Linux thinks are "physical"
- * addresses to the actual real addresses. This allows us to make
+ * addresses to the actual real addresses. This allows us to make
* it appear to Linux that we have contiguous memory starting at
* physical address zero while in fact this could be far from the truth.
- * To avoid confusion, I'll let the words physical and/or real address
- * apply to the Linux addresses while I'll use "absolute address" to
+ * To avoid confusion, I'll let the words physical and/or real address
+ * apply to the Linux addresses while I'll use "absolute address" to
* refer to the actual hardware real address.
*
- * build_iSeries_Memory_Map gets information from the Hypervisor and
+ * build_iSeries_Memory_Map gets information from the Hypervisor and
* looks at the Main Store VPD to determine the absolute addresses
* of the memory that has been assigned to our partition and builds
* a table used to translate Linux's physical addresses to these
- * absolute addresses. Absolute addresses are needed when
+ * absolute addresses. Absolute addresses are needed when
* communicating with the hypervisor (e.g. to build HPT entries)
*/
@@ -428,13 +429,13 @@ static void __init build_iSeries_Memory_
* otherwise, it might not be returned by PLIC as the first
* chunks
*/
-
+
loadAreaFirstChunk = (u32)addr_to_chunk(itLpNaca.xLoadAreaAddr);
loadAreaSize = itLpNaca.xLoadAreaChunks;
/*
- * Only add the pages already mapped here.
- * Otherwise we might add the hpt pages
+ * Only add the pages already mapped here.
+ * Otherwise we might add the hpt pages
* The rest of the pages of the load area
* aren't in the HPT yet and can still
* be assigned an arbitrary physical address
@@ -446,7 +447,7 @@ static void __init build_iSeries_Memory_
/*
* TODO Do we need to do something if the HPT is in the 64MB load area?
- * This would be required if the itLpNaca.xLoadAreaChunks includes
+ * This would be required if the itLpNaca.xLoadAreaChunks includes
* the HPT size
*/
@@ -454,11 +455,11 @@ static void __init build_iSeries_Memory_
" absolute addr = %016lx\n",
chunk_to_addr(loadAreaFirstChunk));
printk("Load area size %dK\n", loadAreaSize * 256);
-
+
for (nextPhysChunk = 0; nextPhysChunk < loadAreaSize; ++nextPhysChunk)
msChunks.abs[nextPhysChunk] =
loadAreaFirstChunk + nextPhysChunk;
-
+
/*
* Get absolute address of our HPT and remember it so
* we won't map it to any physical address
@@ -475,7 +476,7 @@ static void __init build_iSeries_Memory_
num_ptegs = hptSizePages *
(PAGE_SIZE / (sizeof(HPTE) * HPTES_PER_GROUP));
htab_hash_mask = num_ptegs - 1;
-
+
/*
* The actual hashed page table is in the hypervisor,
* we have no direct access
@@ -533,9 +534,9 @@ static void __init build_iSeries_Memory_
}
/*
- * main store size (in chunks) is
+ * main store size (in chunks) is
* totalChunks - hptSizeChunks
- * which should be equal to
+ * which should be equal to
* nextPhysChunk
*/
systemcfg->physicalMemorySize = chunk_to_addr(nextPhysChunk);
@@ -650,7 +651,7 @@ extern unsigned long ppc_tb_freq;
/*
* Document me.
*/
-void __init iSeries_setup_arch(void)
+static void __init iSeries_setup_arch(void)
{
void *eventStack;
unsigned procIx = get_paca()->lppaca.dyn_hv_phys_proc_index;
@@ -669,14 +670,14 @@ void __init iSeries_setup_arch(void)
*/
eventStack = alloc_bootmem_pages(LpEventStackSize);
memset(eventStack, 0, LpEventStackSize);
-
+
/* Invoke the hypervisor to initialize the event stack */
HvCallEvent_setLpEventStack(0, eventStack, LpEventStackSize);
/* Initialize fields in our Lp Event Queue */
xItLpQueue.xSlicEventStackPtr = (char *)eventStack;
xItLpQueue.xSlicCurEventPtr = (char *)eventStack;
- xItLpQueue.xSlicLastValidEventPtr = (char *)eventStack +
+ xItLpQueue.xSlicLastValidEventPtr = (char *)eventStack +
(LpEventStackSize - LpEventMaxSize);
xItLpQueue.xIndex = 0;
@@ -694,7 +695,7 @@ void __init iSeries_setup_arch(void)
tbFreqMhzHundreths = (tbFreqHz / 10000) - (tbFreqMhz * 100);
ppc_tb_freq = tbFreqHz;
- printk("Max logical processors = %d\n",
+ printk("Max logical processors = %d\n",
itVpdAreas.xSlicMaxLogicalProcs);
printk("Max physical processors = %d\n",
itVpdAreas.xSlicMaxPhysicalProcs);
@@ -706,7 +707,7 @@ void __init iSeries_setup_arch(void)
printk("Processor version = %x\n", systemcfg->processor);
}
-void iSeries_get_cpuinfo(struct seq_file *m)
+static void iSeries_get_cpuinfo(struct seq_file *m)
{
seq_printf(m, "machine\t\t: 64-bit iSeries Logical Partition\n");
}
@@ -715,7 +716,7 @@ void iSeries_get_cpuinfo(struct seq_file
* Document me.
* and Implement me.
*/
-int iSeries_get_irq(struct pt_regs *regs)
+static int iSeries_get_irq(struct pt_regs *regs)
{
/* -2 means ignore this interrupt */
return -2;
@@ -724,7 +725,7 @@ int iSeries_get_irq(struct pt_regs *regs
/*
* Document me.
*/
-void iSeries_restart(char *cmd)
+static void iSeries_restart(char *cmd)
{
mf_reboot();
}
@@ -732,7 +733,7 @@ void iSeries_restart(char *cmd)
/*
* Document me.
*/
-void iSeries_power_off(void)
+static void iSeries_power_off(void)
{
mf_power_off();
}
@@ -740,14 +741,11 @@ void iSeries_power_off(void)
/*
* Document me.
*/
-void iSeries_halt(void)
+static void iSeries_halt(void)
{
mf_power_off();
}
-/* JDH Hack */
-unsigned long jdh_time = 0;
-
extern void setup_default_decr(void);
/*
@@ -758,17 +756,17 @@ extern void setup_default_decr(void);
* and sets up the kernel timer decrementer based on that value.
*
*/
-void __init iSeries_calibrate_decr(void)
+static void __init iSeries_calibrate_decr(void)
{
unsigned long cyclesPerUsec;
struct div_result divres;
-
+
/* Compute decrementer (and TB) frequency in cycles/sec */
cyclesPerUsec = ppc_tb_freq / 1000000;
/*
* Set the amount to refresh the decrementer by. This
- * is the number of decrementer ticks it takes for
+ * is the number of decrementer ticks it takes for
* 1/HZ seconds.
*/
tb_ticks_per_jiffy = ppc_tb_freq / HZ;
@@ -793,7 +791,7 @@ void __init iSeries_calibrate_decr(void)
setup_default_decr();
}
-void __init iSeries_progress(char * st, unsigned short code)
+static void __init iSeries_progress(char * st, unsigned short code)
{
printk("Progress: [%04x] - %s\n", (unsigned)code, st);
if (!piranha_simulator && mf_initialized) {
@@ -825,7 +823,7 @@ static void __init iSeries_fixup_klimit(
}
}
-int __init iSeries_src_init(void)
+static int __init iSeries_src_init(void)
{
/* clear the progress line */
ppc_md.progress(" ", 0xffff);
diff -ruNp linus-cleanup.1/arch/ppc64/kernel/iSeries_setup.h linus-cleanup.2/arch/ppc64/kernel/iSeries_setup.h
--- linus-cleanup.1/arch/ppc64/kernel/iSeries_setup.h 2004-09-24 15:23:06.000000000 +1000
+++ linus-cleanup.2/arch/ppc64/kernel/iSeries_setup.h 2005-03-15 15:22:05.000000000 +1100
@@ -19,19 +19,8 @@
#ifndef __ISERIES_SETUP_H__
#define __ISERIES_SETUP_H__
-extern void iSeries_setup_arch(void);
-extern void iSeries_setup_residual(struct seq_file *m, int cpu_id);
-extern void iSeries_get_cpuinfo(struct seq_file *m);
-extern void iSeries_init_IRQ(void);
-extern int iSeries_get_irq(struct pt_regs *regs);
-extern void iSeries_restart(char *cmd);
-extern void iSeries_power_off(void);
-extern void iSeries_halt(void);
-extern void iSeries_time_init(void);
extern void iSeries_get_boot_time(struct rtc_time *tm);
extern int iSeries_set_rtc_time(struct rtc_time *tm);
extern void iSeries_get_rtc_time(struct rtc_time *tm);
-extern void iSeries_calibrate_decr(void);
-extern void iSeries_progress( char *, unsigned short );
#endif /* __ISERIES_SETUP_H__ */
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://ozlabs.org/pipermail/linuxppc64-dev/attachments/20050315/9622fe83/attachment.pgp
More information about the Linuxppc64-dev
mailing list