[PATCH 2/4] ppc64 iSeries: remove XmPciLpEvent.c
Stephen Rothwell
sfr at canb.auug.org.au
Wed Jun 8 17:36:28 EST 2005
Hi Andrew,
This patch just merges XmPciLpEvent.c into iSeries_irq.c (the only caller
of its only external function). XmPciLpEvent.c just contained the
lowlevel iSeries irq code.
Signed-off-by: Stephen Rothwell <sfr at canb.auug.org.au>
--
Cheers,
Stephen Rothwell sfr at canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
diff -ruN linus-iSeries-headers.17/arch/ppc64/kernel/Makefile linus-iSeries-headers.18/arch/ppc64/kernel/Makefile
--- linus-iSeries-headers.17/arch/ppc64/kernel/Makefile 2005-06-05 03:40:47.000000000 +1000
+++ linus-iSeries-headers.18/arch/ppc64/kernel/Makefile 2005-06-08 12:15:34.000000000 +1000
@@ -21,7 +21,7 @@
obj-$(CONFIG_PCI) += pci.o pci_iommu.o iomap.o $(pci-obj-y)
-obj-$(CONFIG_PPC_ISERIES) += iSeries_irq.o XmPciLpEvent.o \
+obj-$(CONFIG_PPC_ISERIES) += iSeries_irq.o \
HvCall.o HvLpConfig.o LparData.o \
iSeries_setup.o ItLpQueue.o hvCall.o \
mf.o HvLpEvent.o iSeries_proc.o iSeries_htab.o \
diff -ruN linus-iSeries-headers.17/arch/ppc64/kernel/XmPciLpEvent.c linus-iSeries-headers.18/arch/ppc64/kernel/XmPciLpEvent.c
--- linus-iSeries-headers.17/arch/ppc64/kernel/XmPciLpEvent.c 2005-06-08 12:10:56.000000000 +1000
+++ linus-iSeries-headers.18/arch/ppc64/kernel/XmPciLpEvent.c 1970-01-01 10:00:00.000000000 +1000
@@ -1,183 +0,0 @@
-/*
- * File XmPciLpEvent.c created by Wayne Holm on Mon Jan 15 2001.
- *
- * This module handles PCI interrupt events sent by the iSeries Hypervisor.
- */
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/smp.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <linux/ide.h>
-
-#include <asm/iSeries/HvTypes.h>
-#include <asm/iSeries/HvLpEvent.h>
-#include <asm/iSeries/HvCallPci.h>
-#include <asm/iSeries/iSeries_irq.h>
-#include <asm/ppcdebug.h>
-
-static long Pci_Interrupt_Count;
-static long Pci_Event_Count;
-
-enum XmPciLpEvent_Subtype {
- XmPciLpEvent_BusCreated = 0, // PHB has been created
- XmPciLpEvent_BusError = 1, // PHB has failed
- XmPciLpEvent_BusFailed = 2, // Msg to Secondary, Primary failed bus
- XmPciLpEvent_NodeFailed = 4, // Multi-adapter bridge has failed
- XmPciLpEvent_NodeRecovered = 5, // Multi-adapter bridge has recovered
- XmPciLpEvent_BusRecovered = 12, // PHB has been recovered
- XmPciLpEvent_UnQuiesceBus = 18, // Secondary bus unqiescing
- XmPciLpEvent_BridgeError = 21, // Bridge Error
- XmPciLpEvent_SlotInterrupt = 22 // Slot interrupt
-};
-
-struct XmPciLpEvent_BusInterrupt {
- HvBusNumber busNumber;
- HvSubBusNumber subBusNumber;
-};
-
-struct XmPciLpEvent_NodeInterrupt {
- HvBusNumber busNumber;
- HvSubBusNumber subBusNumber;
- HvAgentId deviceId;
-};
-
-struct XmPciLpEvent {
- struct HvLpEvent hvLpEvent;
-
- union {
- u64 alignData; // Align on an 8-byte boundary
-
- struct {
- u32 fisr;
- HvBusNumber busNumber;
- HvSubBusNumber subBusNumber;
- HvAgentId deviceId;
- } slotInterrupt;
-
- struct XmPciLpEvent_BusInterrupt busFailed;
- struct XmPciLpEvent_BusInterrupt busRecovered;
- struct XmPciLpEvent_BusInterrupt busCreated;
-
- struct XmPciLpEvent_NodeInterrupt nodeFailed;
- struct XmPciLpEvent_NodeInterrupt nodeRecovered;
-
- } eventData;
-
-};
-
-static void intReceived(struct XmPciLpEvent *eventParm,
- struct pt_regs *regsParm)
-{
- int irq;
-
- ++Pci_Interrupt_Count;
-#if 0
- PPCDBG(PPCDBG_BUSWALK, "PCI: XmPciLpEvent.c: intReceived\n");
-#endif
-
- switch (eventParm->hvLpEvent.xSubtype) {
- case XmPciLpEvent_SlotInterrupt:
- irq = eventParm->hvLpEvent.xCorrelationToken;
- /* Dispatch the interrupt handlers for this irq */
- ppc_irq_dispatch_handler(regsParm, irq);
- HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber,
- eventParm->eventData.slotInterrupt.subBusNumber,
- eventParm->eventData.slotInterrupt.deviceId);
- break;
- /* Ignore error recovery events for now */
- case XmPciLpEvent_BusCreated:
- printk(KERN_INFO "XmPciLpEvent.c: system bus %d created\n",
- eventParm->eventData.busCreated.busNumber);
- break;
- case XmPciLpEvent_BusError:
- case XmPciLpEvent_BusFailed:
- printk(KERN_INFO "XmPciLpEvent.c: system bus %d failed\n",
- eventParm->eventData.busFailed.busNumber);
- break;
- case XmPciLpEvent_BusRecovered:
- case XmPciLpEvent_UnQuiesceBus:
- printk(KERN_INFO "XmPciLpEvent.c: system bus %d recovered\n",
- eventParm->eventData.busRecovered.busNumber);
- break;
- case XmPciLpEvent_NodeFailed:
- case XmPciLpEvent_BridgeError:
- printk(KERN_INFO
- "XmPciLpEvent.c: multi-adapter bridge %d/%d/%d failed\n",
- eventParm->eventData.nodeFailed.busNumber,
- eventParm->eventData.nodeFailed.subBusNumber,
- eventParm->eventData.nodeFailed.deviceId);
- break;
- case XmPciLpEvent_NodeRecovered:
- printk(KERN_INFO
- "XmPciLpEvent.c: multi-adapter bridge %d/%d/%d recovered\n",
- eventParm->eventData.nodeRecovered.busNumber,
- eventParm->eventData.nodeRecovered.subBusNumber,
- eventParm->eventData.nodeRecovered.deviceId);
- break;
- default:
- printk(KERN_ERR
- "XmPciLpEvent.c: unrecognized event subtype 0x%x\n",
- eventParm->hvLpEvent.xSubtype);
- break;
- }
-}
-
-static void XmPciLpEvent_handler(struct HvLpEvent *eventParm,
- struct pt_regs *regsParm)
-{
-#ifdef CONFIG_PCI
-#if 0
- PPCDBG(PPCDBG_BUSWALK, "XmPciLpEvent_handler, type 0x%x\n",
- eventParm->xType);
-#endif
- ++Pci_Event_Count;
-
- if (eventParm && (eventParm->xType == HvLpEvent_Type_PciIo)) {
- switch (eventParm->xFlags.xFunction) {
- case HvLpEvent_Function_Int:
- intReceived((struct XmPciLpEvent *)eventParm, regsParm);
- break;
- case HvLpEvent_Function_Ack:
- printk(KERN_ERR
- "XmPciLpEvent.c: unexpected ack received\n");
- break;
- default:
- printk(KERN_ERR
- "XmPciLpEvent.c: unexpected event function %d\n",
- (int)eventParm->xFlags.xFunction);
- break;
- }
- } else if (eventParm)
- printk(KERN_ERR
- "XmPciLpEvent.c: Unrecognized PCI event type 0x%x\n",
- (int)eventParm->xType);
- else
- printk(KERN_ERR "XmPciLpEvent.c: NULL event received\n");
-#endif
-}
-
-/* This should be called sometime prior to buswalk (init_IRQ would be good) */
-int XmPciLpEvent_init()
-{
- int xRc;
-
- PPCDBG(PPCDBG_BUSWALK,
- "XmPciLpEvent_init, Register Event type 0x%04X\n",
- HvLpEvent_Type_PciIo);
-
- xRc = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
- &XmPciLpEvent_handler);
- if (xRc == 0) {
- xRc = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
- if (xRc != 0)
- printk(KERN_ERR "XmPciLpEvent.c: open event path "
- "failed with rc 0x%x\n", xRc);
- } else
- printk(KERN_ERR "XmPciLpEvent.c: register handler "
- "failed with rc 0x%x\n", xRc);
- return xRc;
-}
diff -ruN linus-iSeries-headers.17/arch/ppc64/kernel/iSeries_irq.c linus-iSeries-headers.18/arch/ppc64/kernel/iSeries_irq.c
--- linus-iSeries-headers.17/arch/ppc64/kernel/iSeries_irq.c 2005-06-08 12:05:30.000000000 +1000
+++ linus-iSeries-headers.18/arch/ppc64/kernel/iSeries_irq.c 2005-06-08 12:15:02.000000000 +1000
@@ -1,6 +1,7 @@
/*
* This module supports the iSeries PCI bus interrupt handling
* Copyright (C) 20yy <Robert L Holtorf> <IBM Corp>
+ * Copyright (C) 2004-2005 IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -22,6 +23,7 @@
* Created, December 13, 2000 by Wayne Holm
* End Change Activity
*/
+#include <linux/config.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/threads.h>
@@ -30,11 +32,12 @@
#include <linux/string.h>
#include <linux/bootmem.h>
#include <linux/ide.h>
-
#include <linux/irq.h>
#include <linux/spinlock.h>
-#include <asm/ppcdebug.h>
+#include <asm/ppcdebug.h>
+#include <asm/iSeries/HvTypes.h>
+#include <asm/iSeries/HvLpEvent.h>
#include <asm/iSeries/HvCallPci.h>
#include <asm/iSeries/HvCallXm.h>
#include <asm/iSeries/iSeries_irq.h>
@@ -46,6 +49,169 @@
/* Note: the pcnet32 driver assumes irq numbers < 2 aren't valid. :( */
static int next_virtual_irq = 2;
+static long Pci_Interrupt_Count;
+static long Pci_Event_Count;
+
+enum XmPciLpEvent_Subtype {
+ XmPciLpEvent_BusCreated = 0, // PHB has been created
+ XmPciLpEvent_BusError = 1, // PHB has failed
+ XmPciLpEvent_BusFailed = 2, // Msg to Secondary, Primary failed bus
+ XmPciLpEvent_NodeFailed = 4, // Multi-adapter bridge has failed
+ XmPciLpEvent_NodeRecovered = 5, // Multi-adapter bridge has recovered
+ XmPciLpEvent_BusRecovered = 12, // PHB has been recovered
+ XmPciLpEvent_UnQuiesceBus = 18, // Secondary bus unqiescing
+ XmPciLpEvent_BridgeError = 21, // Bridge Error
+ XmPciLpEvent_SlotInterrupt = 22 // Slot interrupt
+};
+
+struct XmPciLpEvent_BusInterrupt {
+ HvBusNumber busNumber;
+ HvSubBusNumber subBusNumber;
+};
+
+struct XmPciLpEvent_NodeInterrupt {
+ HvBusNumber busNumber;
+ HvSubBusNumber subBusNumber;
+ HvAgentId deviceId;
+};
+
+struct XmPciLpEvent {
+ struct HvLpEvent hvLpEvent;
+
+ union {
+ u64 alignData; // Align on an 8-byte boundary
+
+ struct {
+ u32 fisr;
+ HvBusNumber busNumber;
+ HvSubBusNumber subBusNumber;
+ HvAgentId deviceId;
+ } slotInterrupt;
+
+ struct XmPciLpEvent_BusInterrupt busFailed;
+ struct XmPciLpEvent_BusInterrupt busRecovered;
+ struct XmPciLpEvent_BusInterrupt busCreated;
+
+ struct XmPciLpEvent_NodeInterrupt nodeFailed;
+ struct XmPciLpEvent_NodeInterrupt nodeRecovered;
+
+ } eventData;
+
+};
+
+static void intReceived(struct XmPciLpEvent *eventParm,
+ struct pt_regs *regsParm)
+{
+ int irq;
+
+ ++Pci_Interrupt_Count;
+#if 0
+ PPCDBG(PPCDBG_BUSWALK, "PCI: XmPciLpEvent.c: intReceived\n");
+#endif
+
+ switch (eventParm->hvLpEvent.xSubtype) {
+ case XmPciLpEvent_SlotInterrupt:
+ irq = eventParm->hvLpEvent.xCorrelationToken;
+ /* Dispatch the interrupt handlers for this irq */
+ ppc_irq_dispatch_handler(regsParm, irq);
+ HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber,
+ eventParm->eventData.slotInterrupt.subBusNumber,
+ eventParm->eventData.slotInterrupt.deviceId);
+ break;
+ /* Ignore error recovery events for now */
+ case XmPciLpEvent_BusCreated:
+ printk(KERN_INFO "XmPciLpEvent.c: system bus %d created\n",
+ eventParm->eventData.busCreated.busNumber);
+ break;
+ case XmPciLpEvent_BusError:
+ case XmPciLpEvent_BusFailed:
+ printk(KERN_INFO "XmPciLpEvent.c: system bus %d failed\n",
+ eventParm->eventData.busFailed.busNumber);
+ break;
+ case XmPciLpEvent_BusRecovered:
+ case XmPciLpEvent_UnQuiesceBus:
+ printk(KERN_INFO "XmPciLpEvent.c: system bus %d recovered\n",
+ eventParm->eventData.busRecovered.busNumber);
+ break;
+ case XmPciLpEvent_NodeFailed:
+ case XmPciLpEvent_BridgeError:
+ printk(KERN_INFO
+ "XmPciLpEvent.c: multi-adapter bridge %d/%d/%d failed\n",
+ eventParm->eventData.nodeFailed.busNumber,
+ eventParm->eventData.nodeFailed.subBusNumber,
+ eventParm->eventData.nodeFailed.deviceId);
+ break;
+ case XmPciLpEvent_NodeRecovered:
+ printk(KERN_INFO
+ "XmPciLpEvent.c: multi-adapter bridge %d/%d/%d recovered\n",
+ eventParm->eventData.nodeRecovered.busNumber,
+ eventParm->eventData.nodeRecovered.subBusNumber,
+ eventParm->eventData.nodeRecovered.deviceId);
+ break;
+ default:
+ printk(KERN_ERR
+ "XmPciLpEvent.c: unrecognized event subtype 0x%x\n",
+ eventParm->hvLpEvent.xSubtype);
+ break;
+ }
+}
+
+static void XmPciLpEvent_handler(struct HvLpEvent *eventParm,
+ struct pt_regs *regsParm)
+{
+#ifdef CONFIG_PCI
+#if 0
+ PPCDBG(PPCDBG_BUSWALK, "XmPciLpEvent_handler, type 0x%x\n",
+ eventParm->xType);
+#endif
+ ++Pci_Event_Count;
+
+ if (eventParm && (eventParm->xType == HvLpEvent_Type_PciIo)) {
+ switch (eventParm->xFlags.xFunction) {
+ case HvLpEvent_Function_Int:
+ intReceived((struct XmPciLpEvent *)eventParm, regsParm);
+ break;
+ case HvLpEvent_Function_Ack:
+ printk(KERN_ERR
+ "XmPciLpEvent.c: unexpected ack received\n");
+ break;
+ default:
+ printk(KERN_ERR
+ "XmPciLpEvent.c: unexpected event function %d\n",
+ (int)eventParm->xFlags.xFunction);
+ break;
+ }
+ } else if (eventParm)
+ printk(KERN_ERR
+ "XmPciLpEvent.c: Unrecognized PCI event type 0x%x\n",
+ (int)eventParm->xType);
+ else
+ printk(KERN_ERR "XmPciLpEvent.c: NULL event received\n");
+#endif
+}
+
+/* This should be called sometime prior to buswalk (init_IRQ would be good) */
+int XmPciLpEvent_init()
+{
+ int xRc;
+
+ PPCDBG(PPCDBG_BUSWALK,
+ "XmPciLpEvent_init, Register Event type 0x%04X\n",
+ HvLpEvent_Type_PciIo);
+
+ xRc = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
+ &XmPciLpEvent_handler);
+ if (xRc == 0) {
+ xRc = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
+ if (xRc != 0)
+ printk(KERN_ERR "XmPciLpEvent.c: open event path "
+ "failed with rc 0x%x\n", xRc);
+ } else
+ printk(KERN_ERR "XmPciLpEvent.c: register handler "
+ "failed with rc 0x%x\n", xRc);
+ return xRc;
+}
+
/* This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c */
void __init iSeries_init_IRQ(void)
{
More information about the Linuxppc64-dev
mailing list