[PATCH 18/19] ppc64: Add timebase-frequency and clock-frequency to iSeries device tree

[Michael Ellerman]

Add timebase-frequency and clock-frequency properties to the cpu nodes in the
iSeries device tree. This removes the need for iSeries_calibrate_decr() so
make generic_calibrate_decr() compile for iSeries and use that instead.

This changes a few printks at boot.

---

 arch/ppc64/kernel/iSeries_setup.c |   83 +++-----------------------------------
 arch/ppc64/kernel/time.c          |    2 
 2 files changed, 9 insertions(+), 76 deletions(-)

Index: work/arch/ppc64/kernel/iSeries_setup.c
===================================================================
--- work.orig/arch/ppc64/kernel/iSeries_setup.c
+++ work/arch/ppc64/kernel/iSeries_setup.c
@@ -83,14 +83,6 @@ static void iSeries_pci_final_fixup(void
 #endif
 
 /* Global Variables */
-static unsigned long procFreqHz;
-static unsigned long procFreqMhz;
-static unsigned long procFreqMhzHundreths;
-
-static unsigned long tbFreqHz;
-static unsigned long tbFreqMhz;
-static unsigned long tbFreqMhzHundreths;
-
 int piranha_simulator;
 
 extern unsigned long klimit;
@@ -576,36 +568,14 @@ static void __init iSeries_setup_arch(vo
 		printk(KERN_INFO "Using dedicated idle loop\n");
 	}
 
-	/* Add an eye catcher and the systemcfg layout version number */
-	strcpy(systemcfg->eye_catcher, "SYSTEMCFG:PPC64");
-	systemcfg->version.major = SYSTEMCFG_MAJOR;
-	systemcfg->version.minor = SYSTEMCFG_MINOR;
-
 	/* Setup the Lp Event Queue */
 	setup_hvlpevent_queue();
 
-	/* Compute processor frequency */
-	procFreqHz = ((1UL << 34) * 1000000) /
-			xIoHriProcessorVpd[procIx].xProcFreq;
-	procFreqMhz = procFreqHz / 1000000;
-	procFreqMhzHundreths = (procFreqHz / 10000) - (procFreqMhz * 100);
-	ppc_proc_freq = procFreqHz;
-
-	/* Compute time base frequency */
-	tbFreqHz = ((1UL << 32) * 1000000) /
-		xIoHriProcessorVpd[procIx].xTimeBaseFreq;
-	tbFreqMhz = tbFreqHz / 1000000;
-	tbFreqMhzHundreths = (tbFreqHz / 10000) - (tbFreqMhz * 100);
-	ppc_tb_freq = tbFreqHz;
-
 	printk("Max  logical processors = %d\n",
 			itVpdAreas.xSlicMaxLogicalProcs);
 	printk("Max physical processors = %d\n",
 			itVpdAreas.xSlicMaxPhysicalProcs);
-	printk("Processor frequency = %lu.%02lu\n", procFreqMhz,
-			procFreqMhzHundreths);
-	printk("Time base frequency = %lu.%02lu\n", tbFreqMhz,
-			tbFreqMhzHundreths);
+
 	systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR;
 	printk("Processor version = %x\n", systemcfg->processor);
 }
@@ -649,49 +619,6 @@ static void iSeries_halt(void)
 	mf_power_off();
 }
 
-/*
- * void __init iSeries_calibrate_decr()
- *
- * Description:
- *   This routine retrieves the internal processor frequency from the VPD,
- *   and sets up the kernel timer decrementer based on that value.
- *
- */
-static void __init iSeries_calibrate_decr(void)
-{
-	unsigned long	cyclesPerUsec;
-	struct div_result divres;
-
-	/* Compute decrementer (and TB) frequency in cycles/sec */
-	cyclesPerUsec = ppc_tb_freq / 1000000;
-
-	/*
-	 * Set the amount to refresh the decrementer by.  This
-	 * is the number of decrementer ticks it takes for
-	 * 1/HZ seconds.
-	 */
-	tb_ticks_per_jiffy = ppc_tb_freq / HZ;
-
-#if 0
-	/* TEST CODE FOR ADJTIME */
-	tb_ticks_per_jiffy += tb_ticks_per_jiffy / 5000;
-	/* END OF TEST CODE */
-#endif
-
-	/*
-	 * tb_ticks_per_sec = freq; would give better accuracy
-	 * but tb_ticks_per_sec = tb_ticks_per_jiffy*HZ; assures
-	 * that jiffies (and xtime) will match the time returned
-	 * by do_gettimeofday.
-	 */
-	tb_ticks_per_sec = tb_ticks_per_jiffy * HZ;
-	tb_ticks_per_usec = cyclesPerUsec;
-	tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
-	div128_by_32(1024 * 1024, 0, tb_ticks_per_sec, &divres);
-	tb_to_xs = divres.result_low;
-	setup_default_decr();
-}
-
 static void __init iSeries_progress(char * st, unsigned short code)
 {
 	printk("Progress: [%04x] - %s\n", (unsigned)code, st);
@@ -849,7 +776,7 @@ struct machdep_calls __initdata iseries_
 	.get_boot_time	= iSeries_get_boot_time,
 	.set_rtc_time	= iSeries_set_rtc_time,
 	.get_rtc_time	= iSeries_get_rtc_time,
-	.calibrate_decr	= iSeries_calibrate_decr,
+	.calibrate_decr	= generic_calibrate_decr,
 	.progress	= iSeries_progress,
 };
 
@@ -1033,6 +960,12 @@ void dt_cpus(struct iseries_flat_dt *dt)
 		dt_prop_u32(dt, "d-cache-size", d->xDataL1CacheSizeKB * 1024);
 		dt_prop_u32(dt, "d-cache-line-size", d->xDataCacheOperandSize);
 
+		/* magic conversions to Hz copied from old code */
+		dt_prop_u32(dt, "clock-frequency",
+			((1UL << 34) * 1000000) / d->xProcFreq);
+		dt_prop_u32(dt, "timebase-frequency",
+			((1UL << 32) * 1000000) / d->xTimeBaseFreq);
+
 		dt_prop_u32(dt, "reg", i);
 
 		if (dt->header.boot_cpuid_phys == i)
Index: work/arch/ppc64/kernel/time.c
===================================================================
--- work.orig/arch/ppc64/kernel/time.c
+++ work/arch/ppc64/kernel/time.c
@@ -472,7 +472,7 @@ int do_settimeofday(struct timespec *tv)
 
 EXPORT_SYMBOL(do_settimeofday);
 
-#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_MAPLE) || defined(CONFIG_PPC_BPA)
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_MAPLE) || defined(CONFIG_PPC_BPA) || defined(CONFIG_PPC_ISERIES)
 void __init generic_calibrate_decr(void)
 {
 	struct device_node *cpu;