p620 hangs instantiating rtas at 0x00000000deadbeef

[Olaf Hering]

Current Linus tree hangs on p620, xmon does not trigger.
rc3 was already broken.
And 2.6.10 doesnt work either...


BOOTP S = 1
FILE: orange
Load Addr=0x4000 Max Size=0xbfc000
FINAL Packet Count = 5793
FINAL File Size = 2965713 bytes.
zImage starting: loaded at 0x400000
Allocating 0x94c000 bytes for kernel ...
gunzipping (0x2100000 <- 0x407000:0x6c217a)...done 0x7e23d8 bytes
0xe4ac bytes of heap consumed, max in use 0xa2a8
OF stdout device is: /pci at fff7f09000/isa at 10/serial at i3f8
command line:
memory layout at init:
  alloc_bottom : 0000000002960000
  alloc_top    : 0000000040000000
  alloc_top_hi : 0000000100000000
  rmo_top      : 0000000040000000
  ram_top      : 0000000100000000
Looking for displays
found display   : /pci at fff7f0a000/pci at b,4/display at 1, opening ... done
opening PHB /pci at fff7f09000... done
opening PHB /pci at fff7f09000/pci at b... done
opening PHB /pci at fff7f09000/pci at b,2... done
opening PHB /pci at fff7f09000/pci at b,4... done
opening PHB /pci at fff7f09000/pci at b,6... done
opening PHB /pci at fff7f0a000... done
opening PHB /pci at fff7f0a000/pci at b... done
opening PHB /pci at fff7f0a000/pci at b,2... done
opening PHB /pci at fff7f0a000/pci at b,4... done
opening PHB /pci at fff7f0a000/pci at b,6... done
opening PHB /pci at fff7f0a000/pci at c... done
opening PHB /pci at fff7f0a000/pci at c,2... done
opening PHB /pci at fff7f0a000/pci at c,4... done
opening PHB /pci at fff7f0a000/pci at c,6... done
instantiating rtas at 0x00000000deadbeef... failed
0000000000000000 : boot cpu     0000000000000000
0000000000000001 : starting cpu hw idx 0000000000000002... done
0000000000000002 : starting cpu hw idx 0000000000000004... done
0000000000000003 : starting cpu hw idx 0000000000000006... done
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000002a61000 -> 0x0000000002a621df
Device tree struct  0x0000000002a63000 -> 0x0000000002a72000
Calling quiesce ...
returning from prom_init



SLES9 does work.


BOOTP S = 1
FILE: orange
Load Addr=0x4000 Max Size=0xbfc000
FINAL Packet Count = 10913
FINAL File Size = 5587130 bytes.

zImage starting: loaded at 0x400000
initial ramdisk moving 0x3d52000 <- 0x695000 (2add80 bytes)
    trying: 0x01400000
    trying: 0x01500000
    trying: 0x01600000
    trying: 0x01700000
    trying: 0x01800000
    trying: 0x01900000
    trying: 0x01a00000
    trying: 0x01b00000
    trying: 0x01c00000
    trying: 0x01d00000
    trying: 0x01e00000
    trying: 0x01f00000
    trying: 0x02000000
    trying: 0x02100000
gunzipping (0x2100000 <- 0x407000:0x69466d)...done 8955683 bytes
58392 bytes of heap consumed, max in use 42136
... skipping 0x10000 bytes of ELF header
copy built-in cmdline(27) manual=1 quiet start_shell
setprop bootargs: 27
kernel:
        entry addr = 0x2110000
        a1         = 0x0,
        a2         = 0x0,
        prom       = 0xc1e030,
        bi_recs    = 0x2a6b000,
Looking for displays
OF stdout is    : /pci at fff7f09000/isa at 10/serial at i3f8
found display   : /pci at fff7f0a000/pci at b,4/display at 1
Opening displays...
opening display : /pci at fff7f0a000/pci at b,4/display at 1... done
instantiating rtas at 0x000000003ff59000... done
0000000000000000 : booting  cpu /cpus/PowerPC,RS64-III at 0
0000000000000001 : starting cpu /cpus/PowerPC,RS64-III at 2... ... done
0000000000000002 : starting cpu /cpus/PowerPC,RS64-III at 4... ... done
0000000000000003 : starting cpu /cpus/PowerPC,RS64-III at 6... ... done
opening PHB /pci at fff7f09000... done
opening PHB /pci at fff7f09000/pci at b... done
opening PHB /pci at fff7f09000/pci at b,2... done
opening PHB /pci at fff7f09000/pci at b,4... done
opening PHB /pci at fff7f09000/pci at b,6... done
opening PHB /pci at fff7f0a000... done
opening PHB /pci at fff7f0a000/pci at b... done
opening PHB /pci at fff7f0a000/pci at b,2... done
opening PHB /pci at fff7f0a000/pci at b,4... done
opening PHB /pci at fff7f0a000/pci at b,6... done
opening PHB /pci at fff7f0a000/pci at c... done
opening PHB /pci at fff7f0a000/pci at c,2... done
opening PHB /pci at fff7f0a000/pci at c,4... done
opening PHB /pci at fff7f0a000/pci at c,6... done
Calling quiesce ...
returning from prom_init
firmware_features = 0x0
Starting Linux PPC64 2.6.5-7.139-pseries64
-