[PATCH] ppc64: Move ppc64_enable_pmcs() logic into a ppc_md function
Michael Ellerman
michael at ellerman.id.au
Tue Aug 9 11:13:36 EST 2005
David asked me to put power4_enable_pmcs() in arch/ppc64/kernel/pmc.c, so
here's an updated (again) version.
I've tested it on P5 LPAR and P4. It does what it used to.
Signed-off-by: Michael Ellerman <michael at ellerman.id.au>
arch/ppc64/kernel/iSeries_setup.c | 2 +
arch/ppc64/kernel/pSeries_setup.c | 21 ++++++++++++++
arch/ppc64/kernel/pmac_setup.c | 2 +
arch/ppc64/kernel/pmc.c | 21 ++++++++++++++
arch/ppc64/kernel/sysfs.c | 54 ++------------------------------------
include/asm-ppc64/machdep.h | 3 ++
include/asm-ppc64/pmc.h | 2 +
7 files changed, 55 insertions(+), 50 deletions(-)
Index: work/arch/ppc64/kernel/iSeries_setup.c
===================================================================
--- work.orig/arch/ppc64/kernel/iSeries_setup.c
+++ work/arch/ppc64/kernel/iSeries_setup.c
@@ -947,6 +947,8 @@ void __init iSeries_early_setup(void)
ppc_md.calibrate_decr = iSeries_calibrate_decr;
ppc_md.progress = iSeries_progress;
+ /* XXX Implement enable_pmcs for iSeries */
+
if (get_paca()->lppaca.shared_proc) {
ppc_md.idle_loop = iseries_shared_idle;
printk(KERN_INFO "Using shared processor idle loop\n");
Index: work/arch/ppc64/kernel/pSeries_setup.c
===================================================================
--- work.orig/arch/ppc64/kernel/pSeries_setup.c
+++ work/arch/ppc64/kernel/pSeries_setup.c
@@ -61,6 +61,7 @@
#include <asm/plpar_wrappers.h>
#include <asm/xics.h>
#include <asm/firmware.h>
+#include <asm/pmc.h>
#include "i8259.h"
#include "mpic.h"
@@ -187,6 +188,21 @@ static void __init pSeries_setup_mpic(vo
" MPIC ");
}
+static void pseries_lpar_enable_pmcs(void)
+{
+ unsigned long set, reset;
+
+ power4_enable_pmcs();
+
+ set = 1UL << 63;
+ reset = 0;
+ plpar_hcall_norets(H_PERFMON, set, reset);
+
+ /* instruct hypervisor to maintain PMCs */
+ if (firmware_has_feature(FW_FEATURE_SPLPAR))
+ get_paca()->lppaca.pmcregs_in_use = 1;
+}
+
static void __init pSeries_setup_arch(void)
{
/* Fixup ppc_md depending on the type of interrupt controller */
@@ -245,6 +261,11 @@ static void __init pSeries_setup_arch(vo
printk(KERN_INFO "Using default idle loop\n");
ppc_md.idle_loop = default_idle;
}
+
+ if (systemcfg->platform & PLATFORM_LPAR)
+ ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
+ else
+ ppc_md.enable_pmcs = power4_enable_pmcs;
}
static int __init pSeries_init_panel(void)
Index: work/arch/ppc64/kernel/pmac_setup.c
===================================================================
--- work.orig/arch/ppc64/kernel/pmac_setup.c
+++ work/arch/ppc64/kernel/pmac_setup.c
@@ -71,6 +71,7 @@
#include <asm/of_device.h>
#include <asm/lmb.h>
#include <asm/smu.h>
+#include <asm/pmc.h>
#include "pmac.h"
#include "mpic.h"
@@ -511,4 +512,5 @@ struct machdep_calls __initdata pmac_md
.progress = pmac_progress,
.check_legacy_ioport = pmac_check_legacy_ioport,
.idle_loop = native_idle,
+ .enable_pmcs = power4_enable_cpus,
};
Index: work/arch/ppc64/kernel/sysfs.c
===================================================================
--- work.orig/arch/ppc64/kernel/sysfs.c
+++ work/arch/ppc64/kernel/sysfs.c
@@ -101,6 +101,8 @@ static int __init setup_smt_snooze_delay
}
__setup("smt-snooze-delay=", setup_smt_snooze_delay);
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
/*
* Enabling PMCs will slow partition context switch times so we only do
* it the first time we write to the PMCs.
@@ -110,63 +112,15 @@ static DEFINE_PER_CPU(char, pmcs_enabled
void ppc64_enable_pmcs(void)
{
- unsigned long hid0;
-#ifdef CONFIG_PPC_PSERIES
- unsigned long set, reset;
-#endif /* CONFIG_PPC_PSERIES */
-
/* Only need to enable them once */
if (__get_cpu_var(pmcs_enabled))
return;
__get_cpu_var(pmcs_enabled) = 1;
- switch (systemcfg->platform) {
- case PLATFORM_PSERIES:
- case PLATFORM_POWERMAC:
- hid0 = mfspr(HID0);
- hid0 |= 1UL << (63 - 20);
-
- /* POWER4 requires the following sequence */
- asm volatile(
- "sync\n"
- "mtspr %1, %0\n"
- "mfspr %0, %1\n"
- "mfspr %0, %1\n"
- "mfspr %0, %1\n"
- "mfspr %0, %1\n"
- "mfspr %0, %1\n"
- "mfspr %0, %1\n"
- "isync" : "=&r" (hid0) : "i" (HID0), "0" (hid0):
- "memory");
- break;
-
-#ifdef CONFIG_PPC_PSERIES
- case PLATFORM_PSERIES_LPAR:
- set = 1UL << 63;
- reset = 0;
- plpar_hcall_norets(H_PERFMON, set, reset);
- break;
-#endif /* CONFIG_PPC_PSERIES */
-
- default:
- break;
- }
-
- /* instruct hypervisor to maintain PMCs */
- if (firmware_has_feature(FW_FEATURE_SPLPAR))
- get_paca()->lppaca.pmcregs_in_use = 1;
+ if (ppc_md.enable_pmcs)
+ ppc_md.enable_pmcs();
}
-
-#else
-
-/* PMC stuff */
-void ppc64_enable_pmcs(void)
-{
- /* XXX Implement for iseries */
-}
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
EXPORT_SYMBOL(ppc64_enable_pmcs);
/* XXX convert to rusty's on_one_cpu */
Index: work/include/asm-ppc64/machdep.h
===================================================================
--- work.orig/include/asm-ppc64/machdep.h
+++ work/include/asm-ppc64/machdep.h
@@ -140,6 +140,9 @@ struct machdep_calls {
/* Idle loop for this platform, leave empty for default idle loop */
int (*idle_loop)(void);
+
+ /* Function to enable pmcs for this platform, called once per cpu. */
+ void (*enable_pmcs)(void);
};
extern int default_idle(void);
Index: work/arch/ppc64/kernel/pmc.c
===================================================================
--- work.orig/arch/ppc64/kernel/pmc.c
+++ work/arch/ppc64/kernel/pmc.c
@@ -65,3 +65,24 @@ void release_pmc_hardware(void)
spin_unlock(&pmc_owner_lock);
}
EXPORT_SYMBOL_GPL(release_pmc_hardware);
+
+void power4_enable_pmcs(void)
+{
+ unsigned long hid0;
+
+ hid0 = mfspr(HID0);
+ hid0 |= 1UL << (63 - 20);
+
+ /* POWER4 requires the following sequence */
+ asm volatile(
+ "sync\n"
+ "mtspr %1, %0\n"
+ "mfspr %0, %1\n"
+ "mfspr %0, %1\n"
+ "mfspr %0, %1\n"
+ "mfspr %0, %1\n"
+ "mfspr %0, %1\n"
+ "mfspr %0, %1\n"
+ "isync" : "=&r" (hid0) : "i" (HID0), "0" (hid0):
+ "memory");
+}
Index: work/include/asm-ppc64/pmc.h
===================================================================
--- work.orig/include/asm-ppc64/pmc.h
+++ work/include/asm-ppc64/pmc.h
@@ -26,4 +26,6 @@ typedef void (*perf_irq_t)(struct pt_reg
int reserve_pmc_hardware(perf_irq_t new_perf_irq);
void release_pmc_hardware(void);
+void power4_enable_pmcs(void);
+
#endif /* _PPC64_PMC_H */
More information about the Linuxppc64-dev
mailing list