slb_flush_and_rebolt panic trace in 2.6.12-rc2-mm3

R Sharada sharada at in.ibm.com
Wed Apr 13 19:34:24 EST 2005


Hello,
	I was trying to boot the latest kernel version, 2.6.12-rc2-mm3 on a 
p630 box, and found the kernel throwing up this call trace after boot. It does
come down to the login prompt, but keeps throwing out the below call trace when
you attempt to do any operations on the box.

Kernel 2.6.12-rc2-mm3 on an ppc64
                                                                                
Badness in slb_flush_and_rebolt at arch/ppc64/mm/slb.c:52
Call Trace:
[c0000000ff6cf380] [00000000ffe9e6c0] 0xffe9e6c0 (unreliable)
[c0000000ff6cf420] [c000000000048f08] .__schedule_tail+0x9c/0x1b4
[c0000000ff6cf4c0] [c0000000004574cc] .schedule+0x920/0xc50
[c0000000ff6cf5f0] [c0000000004588f0] .schedule_timeout+0xfc/0x104
[c0000000ff6cf6d0] [c000000000258e68] .tty_wait_until_sent+0x124/0x1b8
[c0000000ff6cf7d0] [c00000000025940c] .set_termios+0xbc/0x23c
[c0000000ff6cf890] [c00000000025a01c] .n_tty_ioctl+0x950/0xc78
[c0000000ff6cf960] [c000000000252d9c] .tty_ioctl+0x57c/0x1120
[c0000000ff6cfb60] [c0000000000c753c] .do_ioctl+0xc0/0x12c
[c0000000ff6cfc00] [c0000000000c77b4] .vfs_ioctl+0x20c/0x4d4
[c0000000ff6cfcb0] [c0000000000c7ac8] .sys_ioctl+0x4c/0x8c
[c0000000ff6cfd60] [c0000000000e74e8] .compat_sys_ioctl+0x45c/0x4b4
[c0000000ff6cfe30] [c00000000000d880] syscall_exit+0x0/0x18
llm16.in.ibm.com login: AT S7=45 S0=0 L1&c1 E1 Q0
Password: Login timed out Badness in slb_flush_and_rebolt at arch/ppc64/mm/slb.2Call Trace:
[c0000000ff6cf870] [c0000000ff6cfc90] 0xc0000000ff6cfc90 (unreliable)
[c0000000ff6cf910] [c000000000048f08] .__schedule_tail+0x9c/0x1b4
[c0000000ff6cf9b0] [c0000000004574cc] .schedule+0x920/0xc50
[c0000000ff6cfae0] [c0000000004578d0] .wait_for_completion+0xd4/0x18c
[c0000000ff6cfbe0] [c00000000004ab08] .sched_exec+0x1a8/0x200
[c0000000ff6cfce0] [c0000000000e8c94] .compat_do_execve+0x9c/0x2d0
[c0000000ff6cfd90] [c00000000001b348] .sys32_execve+0x7c/0x108
[c0000000ff6cfe30] [c00000000000d880] syscall_exit+0x0/0x18
                                                                                
Red Hat Enterprise Linux AS release 3.90 (Nahant)
Kernel 2.6.12-rc2-mm3 on an ppc64
                                                                                
llm16.in.ibm.com login:

Anyone else seen this problem on this kernel version? 2.6.12-rc2-mm1 was working
fine for me on the same box. I use the default pSeries_defconfig config options.

Thanks and Regards,
Sharada



More information about the Linuxppc64-dev mailing list