[patch 3/4] Rework secondary SMT thread setup at boot

[nathanl at austin.ibm.com]

Our (ab)use of cpu_possible_map in setup_system to start secondary SMT
threads bothers me.  Mark such threads in cpu_possible_map during
early boot; let RTAS tell us which present cpus are still offline
later so we can start them.

I'm not totally sure about this one, it might be better to set up
cpu_sibling_map in prom_hold_cpus and use that in setup_system.

Signed-off-by: Nathan Lynch <nathanl at austin.ibm.com>


---


diff -puN arch/ppc64/kernel/setup.c~ppc64-fix-secondary-smt-thread-setup arch/ppc64/kernel/setup.c
--- 2.6.8-rc2-mm1/arch/ppc64/kernel/setup.c~ppc64-fix-secondary-smt-thread-setup	2004-07-30 16:32:16.000000000 -0500
+++ 2.6.8-rc2-mm1-nathanl/arch/ppc64/kernel/setup.c	2004-07-30 16:32:16.000000000 -0500
@@ -232,16 +232,17 @@ void setup_system(unsigned long r3, unsi
 		chrp_init(r3, r4, r5, r6, r7);

 #ifdef CONFIG_SMP
-		/* Start secondary threads on SMT systems */
-		for (i = 0; i < NR_CPUS; i++) {
-			if (cpu_available(i) && !cpu_possible(i)) {
+		/* Start secondary threads on SMT systems; primary threads
+		 * are already in the running state.
+		 */
+		for_each_present_cpu(i) {
+			if (query_cpu_stopped
+			    (get_hard_smp_processor_id(i)) == 0) {
 				printk("%16.16x : starting thread\n", i);
 				rtas_call(rtas_token("start-cpu"), 3, 1, &ret,
 					  get_hard_smp_processor_id(i),
 					  (u32)*((unsigned long *)pseries_secondary_smp_init),
 					  i);
-				cpu_set(i, cpu_possible_map);
-				systemcfg->processorCount++;
 			}
 		}
 #endif /* CONFIG_SMP */
diff -puN arch/ppc64/kernel/prom.c~ppc64-fix-secondary-smt-thread-setup arch/ppc64/kernel/prom.c
--- 2.6.8-rc2-mm1/arch/ppc64/kernel/prom.c~ppc64-fix-secondary-smt-thread-setup	2004-07-30 16:32:16.000000000 -0500
+++ 2.6.8-rc2-mm1-nathanl/arch/ppc64/kernel/prom.c	2004-07-30 16:32:16.000000000 -0500
@@ -1076,6 +1076,8 @@ next:
 				cpu_set(cpuid, RELOC(cpu_available_map));
 				cpu_set(cpuid, RELOC(cpu_present_at_boot));
 				cpu_set(cpuid, RELOC(cpu_present_map));
+				cpu_set(cpuid, RELOC(cpu_possible_map));
+				_systemcfg->processorCount++;
 				prom_printf("available\n");
 			} else {
 				prom_printf("not available\n");
diff -puN arch/ppc64/kernel/smp.c~ppc64-fix-secondary-smt-thread-setup arch/ppc64/kernel/smp.c
--- 2.6.8-rc2-mm1/arch/ppc64/kernel/smp.c~ppc64-fix-secondary-smt-thread-setup	2004-07-30 16:32:16.000000000 -0500
+++ 2.6.8-rc2-mm1-nathanl/arch/ppc64/kernel/smp.c	2004-07-30 16:32:16.000000000 -0500
@@ -228,7 +228,6 @@ static void __devinit smp_openpic_setup_
 	do_openpic_setup_cpu();
 }

-#ifdef CONFIG_HOTPLUG_CPU
 /* Get state of physical CPU.
  * Return codes:
  *	0	- The processor is in the RTAS stopped state
@@ -237,7 +236,7 @@ static void __devinit smp_openpic_setup_
  *	-1	- Hardware Error
  *	-2	- Hardware Busy, Try again later.
  */
-static int query_cpu_stopped(unsigned int pcpu)
+int query_cpu_stopped(unsigned int pcpu)
 {
 	int cpu_status;
 	int status, qcss_tok;
@@ -254,6 +253,8 @@ static int query_cpu_stopped(unsigned in
 	return cpu_status;
 }

+#ifdef CONFIG_HOTPLUG_CPU
+
 int __cpu_disable(void)
 {
 	/* FIXME: go put this in a header somewhere */
diff -puN include/asm-ppc64/smp.h~ppc64-fix-secondary-smt-thread-setup include/asm-ppc64/smp.h
--- 2.6.8-rc2-mm1/include/asm-ppc64/smp.h~ppc64-fix-secondary-smt-thread-setup	2004-07-30 16:32:16.000000000 -0500
+++ 2.6.8-rc2-mm1-nathanl/include/asm-ppc64/smp.h	2004-07-30 16:32:16.000000000 -0500
@@ -73,6 +73,7 @@ void smp_init_pSeries(void);
 extern int __cpu_disable(void);
 extern void __cpu_die(unsigned int cpu);
 extern void cpu_die(void) __attribute__((noreturn));
+extern int query_cpu_stopped(unsigned int pcpu);
 #ifdef CONFIG_SCHED_SMT
 extern cpumask_t cpu_sibling_map[NR_CPUS];
 #endif

_

** Sent via the linuxppc64-dev mail list. See http://lists.linuxppc.org/