[PATCH] PPC64 pci_dn cleanups
Stephen Rothwell
sfr at canb.auug.org.au
Wed Jul 28 09:03:01 EST 2004
Hi Paul,
This patch just cleans up arch/ppc64/kernel/pci_dn.c a bit, including:
- remove it from the iSeries build completely
- small changes to Makefile
- remove the "post" parameter from traverse_pci_devices as
noone used it
- make traverse_all_pci_devices static
- remove CONFIG_PPC_PSERIES tests as we no longer build for iSeries
- some reformatting (closer to "standard")
- remove some of pointer casts
Please apply and consider for upstream.
This has been built (with default config) on pSeries and pmac and built and
run on iSeries.
Signed-off-by: Stephen Rothwell <sfr at canb.auug.org.au>
--
Cheers,
Stephen Rothwell sfr at canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
-------------- next part --------------
diff -ruNp 2.6.8-rc2-bk6/arch/ppc64/kernel/Makefile 2.6.8-rc2-bk6.pci/arch/ppc64/kernel/Makefile
--- 2.6.8-rc2-bk6/arch/ppc64/kernel/Makefile 2004-07-21 08:39:34.000000000 +1000
+++ 2.6.8-rc2-bk6.pci/arch/ppc64/kernel/Makefile 2004-07-28 05:46:49.000000000 +1000
@@ -15,14 +15,11 @@ obj-y := setup.o entry.o t
obj-$(CONFIG_PPC_OF) += of_device.o
-obj-$(CONFIG_PCI) += pci.o pci_dn.o pci_iommu.o
+pci-obj-$(CONFIG_PPC_ISERIES) += iSeries_pci.o iSeries_pci_reset.o \
+ iSeries_IoMmTable.o
+pci-obj-$(CONFIG_PPC_PSERIES) += pci_dn.o pci_dma_direct.o
-ifdef CONFIG_PPC_ISERIES
-obj-$(CONFIG_PCI) += iSeries_pci.o iSeries_pci_reset.o \
- iSeries_IoMmTable.o
-else
-obj-$(CONFIG_PCI) += pci_dma_direct.o
-endif
+obj-$(CONFIG_PCI) += pci.o pci_iommu.o $(pci-obj-y)
obj-$(CONFIG_PPC_ISERIES) += iSeries_irq.o \
iSeries_VpdInfo.o XmPciLpEvent.o \
diff -ruNp 2.6.8-rc2-bk6/arch/ppc64/kernel/eeh.c 2.6.8-rc2-bk6.pci/arch/ppc64/kernel/eeh.c
--- 2.6.8-rc2-bk6/arch/ppc64/kernel/eeh.c 2004-07-28 01:32:09.000000000 +1000
+++ 2.6.8-rc2-bk6.pci/arch/ppc64/kernel/eeh.c 2004-07-28 05:15:46.000000000 +1000
@@ -618,7 +618,7 @@ void __init eeh_init(void)
info.buid_lo = BUID_LO(buid);
info.buid_hi = BUID_HI(buid);
- traverse_pci_devices(phb, early_enable_eeh, NULL, &info);
+ traverse_pci_devices(phb, early_enable_eeh, &info);
}
if (eeh_subsystem_enabled) {
diff -ruNp 2.6.8-rc2-bk6/arch/ppc64/kernel/pci.h 2.6.8-rc2-bk6.pci/arch/ppc64/kernel/pci.h
--- 2.6.8-rc2-bk6/arch/ppc64/kernel/pci.h 2004-07-21 08:39:34.000000000 +1000
+++ 2.6.8-rc2-bk6.pci/arch/ppc64/kernel/pci.h 2004-07-28 05:15:36.000000000 +1000
@@ -34,8 +34,8 @@ extern struct pci_dev *ppc64_isabridge_d
*******************************************************************/
struct device_node;
typedef void *(*traverse_func)(struct device_node *me, void *data);
-void *traverse_pci_devices(struct device_node *start, traverse_func pre, traverse_func post, void *data);
-void *traverse_all_pci_devices(traverse_func pre);
+void *traverse_pci_devices(struct device_node *start, traverse_func pre,
+ void *data);
void pci_devs_phb_init(void);
void pci_fix_bus_sysdata(void);
diff -ruNp 2.6.8-rc2-bk6/arch/ppc64/kernel/pci_dn.c 2.6.8-rc2-bk6.pci/arch/ppc64/kernel/pci_dn.c
--- 2.6.8-rc2-bk6/arch/ppc64/kernel/pci_dn.c 2004-07-28 01:32:09.000000000 +1000
+++ 2.6.8-rc2-bk6.pci/arch/ppc64/kernel/pci_dn.c 2004-07-28 05:49:07.000000000 +1000
@@ -19,8 +19,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
@@ -40,20 +38,20 @@
#include "pci.h"
-/* Traverse_func that inits the PCI fields of the device node.
+/*
+ * Traverse_func that inits the PCI fields of the device node.
* NOTE: this *must* be done before read/write config to the device.
*/
-static void * __init
-update_dn_pci_info(struct device_node *dn, void *data)
+static void * __init update_dn_pci_info(struct device_node *dn, void *data)
{
-#ifdef CONFIG_PPC_PSERIES
- struct pci_controller *phb = (struct pci_controller *)data;
+ struct pci_controller *phb = data;
u32 *regs;
char *device_type = get_property(dn, "device_type", NULL);
char *model;
dn->phb = phb;
- if (device_type && strcmp(device_type, "pci") == 0 && get_property(dn, "class-code", NULL) == 0) {
+ if (device_type && (strcmp(device_type, "pci") == 0) &&
+ (get_property(dn, "class-code", NULL) == 0)) {
/* special case for PHB's. Sigh. */
regs = (u32 *)get_property(dn, "bus-range", NULL);
dn->busno = regs[0];
@@ -72,57 +70,47 @@ update_dn_pci_info(struct device_node *d
dn->devfn = (regs[0] >> 8) & 0xff;
}
}
-#endif
return NULL;
}
-/******************************************************************
+/*
* Traverse a device tree stopping each PCI device in the tree.
* This is done depth first. As each node is processed, a "pre"
- * function is called, the children are processed recursively, and
- * then a "post" function is called.
+ * function is called and the children are processed recursively.
*
- * The "pre" and "post" funcs return a value. If non-zero
- * is returned from the "pre" func, the traversal stops and this
- * value is returned. The return value from "post" is not used.
- * This return value is useful when using traverse as
- * a method of finding a device.
+ * The "pre" func returns a value. If non-zero is returned from
+ * the "pre" func, the traversal stops and this value is returned.
+ * This return value is useful when using traverse as a method of
+ * finding a device.
*
- * NOTE: we do not run the funcs for devices that do not appear to
+ * NOTE: we do not run the func for devices that do not appear to
* be PCI except for the start node which we assume (this is good
* because the start node is often a phb which may be missing PCI
* properties).
* We use the class-code as an indicator. If we run into
* one of these nodes we also assume its siblings are non-pci for
* performance.
- *
- ******************************************************************/
-void *traverse_pci_devices(struct device_node *start, traverse_func pre, traverse_func post, void *data)
+ */
+void *traverse_pci_devices(struct device_node *start, traverse_func pre,
+ void *data)
{
struct device_node *dn, *nextdn;
void *ret;
- if (pre && (ret = pre(start, data)) != NULL)
+ if (pre && ((ret = pre(start, data)) != NULL))
return ret;
for (dn = start->child; dn; dn = nextdn) {
nextdn = NULL;
-#ifdef CONFIG_PPC_PSERIES
if (get_property(dn, "class-code", NULL)) {
- if (pre && (ret = pre(dn, data)) != NULL)
+ if (pre && ((ret = pre(dn, data)) != NULL))
return ret;
- if (dn->child) {
+ if (dn->child)
/* Depth first...do children */
nextdn = dn->child;
- } else if (dn->sibling) {
+ else if (dn->sibling)
/* ok, try next sibling instead. */
nextdn = dn->sibling;
- } else {
- /* no more children or siblings...call "post" */
- if (post)
- post(dn, data);
- }
}
-#endif
if (!nextdn) {
/* Walk up to next valid sibling. */
do {
@@ -136,31 +124,35 @@ void *traverse_pci_devices(struct device
return NULL;
}
-/* Same as traverse_pci_devices except this does it for all phbs.
+/*
+ * Same as traverse_pci_devices except this does it for all phbs.
*/
-void *traverse_all_pci_devices(traverse_func pre)
+static void *traverse_all_pci_devices(traverse_func pre)
{
- struct pci_controller* phb;
+ struct pci_controller *phb;
void *ret;
- for (phb=hose_head;phb;phb=phb->next)
- if ((ret = traverse_pci_devices((struct device_node *)phb->arch_data, pre, NULL, phb)) != NULL)
+
+ for (phb = hose_head; phb; phb = phb->next)
+ if ((ret = traverse_pci_devices(phb->arch_data, pre, phb))
+ != NULL)
return ret;
return NULL;
}
-/* Traversal func that looks for a <busno,devfcn> value.
+/*
+ * Traversal func that looks for a <busno,devfcn> value.
* If found, the device_node is returned (thus terminating the traversal).
*/
-static void *
-is_devfn_node(struct device_node *dn, void *data)
+static void *is_devfn_node(struct device_node *dn, void *data)
{
int busno = ((unsigned long)data >> 8) & 0xff;
int devfn = ((unsigned long)data) & 0xff;
- return (devfn == dn->devfn && busno == dn->busno) ? dn : NULL;
+ return ((devfn == dn->devfn) && (busno == dn->busno)) ? dn : NULL;
}
-/* This is the "slow" path for looking up a device_node from a
+/*
+ * This is the "slow" path for looking up a device_node from a
* pci_dev. It will hunt for the device under its parent's
* phb and then update sysdata for a future fastpath.
*
@@ -174,14 +166,14 @@ is_devfn_node(struct device_node *dn, vo
*/
struct device_node *fetch_dev_dn(struct pci_dev *dev)
{
- struct device_node *orig_dn = (struct device_node *)dev->sysdata;
+ struct device_node *orig_dn = dev->sysdata;
struct pci_controller *phb = orig_dn->phb; /* assume same phb as orig_dn */
struct device_node *phb_dn;
struct device_node *dn;
unsigned long searchval = (dev->bus->number << 8) | dev->devfn;
- phb_dn = (struct device_node *)(phb->arch_data);
- dn = (struct device_node *)traverse_pci_devices(phb_dn, is_devfn_node, NULL, (void *)searchval);
+ phb_dn = phb->arch_data;
+ dn = traverse_pci_devices(phb_dn, is_devfn_node, (void *)searchval);
if (dn) {
dev->sysdata = dn;
/* ToDo: call some device init hook here */
@@ -191,25 +183,23 @@ struct device_node *fetch_dev_dn(struct
EXPORT_SYMBOL(fetch_dev_dn);
-/******************************************************************
+/*
* Actually initialize the phbs.
* The buswalk on this phb has not happened yet.
- ******************************************************************/
-void __init
-pci_devs_phb_init(void)
+ */
+void __init pci_devs_phb_init(void)
{
/* This must be done first so the device nodes have valid pci info! */
traverse_all_pci_devices(update_dn_pci_info);
}
-static void __init
-pci_fixup_bus_sysdata_list(struct list_head *bus_list)
+static void __init pci_fixup_bus_sysdata_list(struct list_head *bus_list)
{
struct list_head *ln;
struct pci_bus *bus;
- for (ln=bus_list->next; ln != bus_list; ln=ln->next) {
+ for (ln = bus_list->next; ln != bus_list; ln = ln->next) {
bus = pci_bus_b(ln);
if (bus->self)
bus->sysdata = bus->self->sysdata;
@@ -217,7 +207,7 @@ pci_fixup_bus_sysdata_list(struct list_h
}
}
-/******************************************************************
+/*
* Fixup the bus->sysdata ptrs to point to the bus' device_node.
* This is done late in pcibios_init(). We do this mostly for
* sanity, but pci_dma.c uses these at DMA time so they must be
@@ -225,9 +215,8 @@ pci_fixup_bus_sysdata_list(struct list_h
* To do this we recurse down the bus hierarchy. Note that PHB's
* have bus->self == NULL, but fortunately bus->sysdata is already
* correct in this case.
- ******************************************************************/
-void __init
-pci_fix_bus_sysdata(void)
+ */
+void __init pci_fix_bus_sysdata(void)
{
pci_fixup_bus_sysdata_list(&pci_root_buses);
}
More information about the Linuxppc64-dev
mailing list