Successful boot on a 7025-F80
Yannick Bertrand
gringorat at yahoo.ca
Wed Jan 21 15:42:45 EST 2004
Hi,
I just wanted to tell that I successfully booted Linux
2.4.21 (with the ppc64 patch) on a IBM 7025-F80 (with
two 450Mhz RS64-III cpus and 4 Gigs of RAM). I built
the kernel with the ppc64 toolchain.
I'm actually using the kernel to run Gentoo Linux PPC
(which is intended to run on Apple hardware!).
Here's the output of dmesg :
Starting Linux PPC64 2.4.21
-----------------------------------------------------
naca = 0xc000000000004000
naca->pftSize = 0x1a
naca->paca = 0xc000000000426000
systemcfg = 0xc000000000005000
systemcfg->platform = 0x100
systemcfg->processor = 0x340001
systemcfg->processorCount = 0x2
systemcfg->physicalMemorySize = 0x100000000
systemcfg->dCacheL1LineSize = 0x80
systemcfg->iCacheL1LineSize = 0x80
htab_data.htab = 0xc0000000f4000000
htab_data.num_ptegs = 0x80000
-----------------------------------------------------
Linux version 2.4.21 (root at localhost.localdomain) (gcc
version 3.2.3) #1 SMP Thu Jan 15 16:06:36 EST 2004
Boot arguments: console=ttyS0,9600n8 root=/dev/sdc1 ro
On node 0 totalpages: 1048576
zone(0): 1048576 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600n8
root=/dev/sdc1 ro
time_init: decrementer frequency = 451.186209 MHz
time_init: processor frequency = 451.200000 MHz
Console: colour dummy device 80x25
Calibrating delay loop... 901.12 BogoMIPS
Memory: 3973968k available (2992k kernel code, 3124k
data, 500k init) [c000000000000000,c000000100000000]
kdb version 2.1 by Scott Lurndal, Keith Owens.
Copyright SGI, All Rights Reserved
Dentry cache hash table entries: 131072 (order: 9,
2097152 bytes)
Inode cache hash table entries: 131072 (order: 9,
2097152 bytes)
Mount cache hash table entries: 256 (order: 0, 4096
bytes)
Buffer-cache hash table entries: 262144 (order: 9,
2097152 bytes)
Page-cache hash table entries: 262144 (order: 9,
2097152 bytes)
proc_ppc64: Creating /proc/ppc64/pmc
PCI: Creating ../proc/ppc64/pcifr
PCI: Creating ../proc/ppc64/pci
POSIX conformance testing by UNIFIX
Entering SMP Mode...
Probe found 2 CPUs
Waiting for 1 CPUs
Processor 1 found.
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: Probing PCI hardware
ISA bridge at 00:10.0
PCI: Probing PCI hardware done
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society
NET3.039
Initializing RT netlink socket
i/pSeries Real Time Clock Driver v1.1
RTAS daemon started
PPC64 nvram contains 262144 bytes
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch
(rgooch at atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996
okir at monad.swb.de).
initialize_kbd: Keyboard reset failed, no ACK
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
Serial driver version 5.05c (2001-07-08) with
MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size
1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.0.43-k1
Copyright (c) 1999-2003 Intel Corporation.
pcnet32.c:v1.27a 10.02.2002 tsbogend at alpha.franken.de
PCI: Enabling device 04:01.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0x2ec00, warning: CSR
address invalid,
using instead PROM address of 00 06 29 6c b0 85
tx_start_pt(0x0c00):~220 bytes,
BCR18(6821):BurstWrEn NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 36.
eth0: registered as PCnet/FAST 79C971
PCI: Device 11:01.0 not available because of resource
collisions
pcnet32: failed to enable device -- err=-22
PCI: Enabling device 2a:01.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0x291c00, warning: CSR
address invalid,
using instead PROM address of 00 06 29 6c 90 00
tx_start_pt(0x0c00):~220 bytes,
BCR18(6821):BurstWrEn NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 58.
eth1: registered as PCnet/FAST 79C971
pcnet32: 2 cards_found.
Uniform Multi-Platform E-IDE driver Revision:
7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
SCSI subsystem driver Revision: 1.00
PCI: Enabling device 1d:01.0 (0140 -> 0143)
sym53c8xx: at PCI bus 29, device 1, function 0
sym53c8xx: setting PCI_COMMAND_MASTER...(fix-up)
sym53c8xx: 53c875 detected
PCI: Enabling device 24:01.0 (0140 -> 0143)
sym53c8xx: at PCI bus 36, device 1, function 0
sym53c8xx: setting PCI_COMMAND_MASTER...(fix-up)
sym53c8xx: 53c875 detected
PCI: Enabling device 01:01.0 (0140 -> 0143)
sym53c8xx: at PCI bus 1, device 1, function 0
sym53c8xx: setting PCI_COMMAND_MASTER...(fix-up)
sym53c8xx: setting PCI_COMMAND_INVALIDATE (fix-up)
sym53c8xx: 53c896 detected
PCI: Enabling device 01:01.1 (0140 -> 0143)
sym53c8xx: at PCI bus 1, device 1, function 1
sym53c8xx: setting PCI_COMMAND_MASTER...(fix-up)
sym53c8xx: setting PCI_COMMAND_INVALIDATE (fix-up)
sym53c8xx: 53c896 detected
sym53c875-0: rev 0x3 on pci bus 29 device 1 function 0
irq 54
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-1: rev 0x3 on pci bus 36 device 1 function 0
irq 56
sym53c875-1: ID 7, Fast-20, Parity Checking
sym53c896-2: rev 0x7 on pci bus 1 device 1 function 0
irq 35
sym53c896-2: ID 7, Fast-40, Parity Checking
sym53c896-2: handling phase mismatch from SCRIPTS.
sym53c896-3: rev 0x7 on pci bus 1 device 1 function 1
irq 34
sym53c896-3: ID 7, Fast-40, Parity Checking
sym53c896-3: handling phase mismatch from SCRIPTS.
scsi0 : sym53c8xx-1.7.3c-20010512
scsi1 : sym53c8xx-1.7.3c-20010512
scsi2 : sym53c8xx-1.7.3c-20010512
scsi3 : sym53c8xx-1.7.3c-20010512
sym53c875-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
Vendor: IBM Model: DMVS09D Rev: 0255
Type: Direct-Access ANSI SCSI
revision: 03
sym53c875-0-<9,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
Vendor: IBM Model: DMVS09D Rev: 0255
Type: Direct-Access ANSI SCSI
revision: 03
sym53c875-0-<10,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
Vendor: IBM Model: DMVS Rev: 0255
Type: Direct-Access ANSI SCSI
revision: 03
sym53c875-0-<11,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
Vendor: IBM Model: DMVS Rev: 0100
Type: Direct-Access ANSI SCSI
revision: 03
sym53c875-0-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
Vendor: IBM Model: ST318305LC Rev: C549
Type: Direct-Access ANSI SCSI
revision: 03
sym53c875-0-<13,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
Vendor: IBM Model: ST318305LC Rev: C507
Type: Direct-Access ANSI SCSI
revision: 03
Vendor: IBM Model: HSBP06E RSU2SCSI Rev: B018
Type: Enclosure ANSI SCSI
revision: 02
sym53c875-1-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
Vendor: IBM Model: DMVS09D Rev: 0255
Type: Direct-Access ANSI SCSI
revision: 03
sym53c875-1-<9,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
Vendor: IBM Model: DMVS09D Rev: 0255
Type: Direct-Access ANSI SCSI
revision: 03
sym53c875-1-<10,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
Vendor: IBM Model: DMVS Rev: 0255
Type: Direct-Access ANSI SCSI
revision: 03
sym53c875-1-<11,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
Vendor: IBM Model: DMVS Rev: 0255
Type: Direct-Access ANSI SCSI
revision: 03
sym53c875-1-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
Vendor: IBM Model: ST318305LC Rev: C507
Type: Direct-Access ANSI SCSI
revision: 03
sym53c875-1-<13,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
Vendor: IBM Model: DMVS Rev: 0255
Type: Direct-Access ANSI SCSI
revision: 03
Vendor: IBM Model: HSBP06E RSU2SCSI Rev: B018
Type: Enclosure ANSI SCSI
revision: 02
sym53c896-2-<0,*>: FAST-10 SCSI 10.0 MB/s (100.0 ns,
offset 15)
Vendor: ARCHIVE Model: IBM-STD224000N!D Rev: 7500
Type: Sequential-Access ANSI SCSI
revision: 02
Vendor: IBM Model: CDRM00203 !K Rev: 1_03
Type: CD-ROM ANSI SCSI
revision: 02
st: Version 20020805, bufsize 32768, wrt 30720, max
init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi2, channel 0, id 0, lun
0
Attached scsi disk sda at scsi0, channel 0, id 8, lun
0
Attached scsi disk sdb at scsi0, channel 0, id 9, lun
0
Attached scsi disk sdc at scsi0, channel 0, id 10, lun
0
Attached scsi disk sdd at scsi0, channel 0, id 11, lun
0
Attached scsi disk sde at scsi0, channel 0, id 12, lun
0
Attached scsi disk sdf at scsi0, channel 0, id 13, lun
0
Attached scsi disk sdg at scsi1, channel 0, id 8, lun
0
Attached scsi disk sdh at scsi1, channel 0, id 9, lun
0
Attached scsi disk sdi at scsi1, channel 0, id 10, lun
0
Attached scsi disk sdj at scsi1, channel 0, id 11, lun
0
Attached scsi disk sdk at scsi1, channel 0, id 12, lun
0
Attached scsi disk sdl at scsi1, channel 0, id 13, lun
0
SCSI device sda: 17774160 512-byte hdwr sectors (9100
MB)
Partition check:
/dev/scsi/host0/bus0/target8/lun0: p1 p2
SCSI device sdb: 17774160 512-byte hdwr sectors (9100
MB)
/dev/scsi/host0/bus0/target9/lun0: p1 p2
sdc: Spinning up disk..............ready
SCSI device sdc: 17774160 512-byte hdwr sectors (9100
MB)
/dev/scsi/host0/bus0/target10/lun0: p1
sdd: Spinning up disk...............ready
SCSI device sdd: 17774160 512-byte hdwr sectors (9100
MB)
/dev/scsi/host0/bus0/target11/lun0:
sym53c875-0-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
sde: Spinning up disk...<6>sym53c875-0-<12,*>: FAST-20
WIDE SCSI 40.0 MB/s (50.0 ns, offset 16)
..<6>sym53c875-0-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s
(50.0 ns, offset 16)
.<6>sym53c875-0-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s
(50.0 ns, offset 16)
.<6>sym53c875-0-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s
(50.0 ns, offset 16)
.<6>sym53c875-0-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s
(50.0 ns, offset 16)
ready
SCSI device sde: 17774160 512-byte hdwr sectors (9100
MB)
/dev/scsi/host0/bus0/target12/lun0:
sym53c875-0-<13,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
sdf: Spinning up disk...<6>sym53c875-0-<13,*>: FAST-20
WIDE SCSI 40.0 MB/s (50.0 ns, offset 16)
..<6>sym53c875-0-<13,*>: FAST-20 WIDE SCSI 40.0 MB/s
(50.0 ns, offset 16)
.<6>sym53c875-0-<13,*>: FAST-20 WIDE SCSI 40.0 MB/s
(50.0 ns, offset 16)
.<6>sym53c875-0-<13,*>: FAST-20 WIDE SCSI 40.0 MB/s
(50.0 ns, offset 16)
.<6>sym53c875-0-<13,*>: FAST-20 WIDE SCSI 40.0 MB/s
(50.0 ns, offset 16)
ready
SCSI device sdf: 35548320 512-byte hdwr sectors (18201
MB)
/dev/scsi/host0/bus0/target13/lun0:
SCSI device sdg: 17774160 512-byte hdwr sectors (9100
MB)
/dev/scsi/host1/bus0/target8/lun0:
SCSI device sdh: 17774160 512-byte hdwr sectors (9100
MB)
/dev/scsi/host1/bus0/target9/lun0:
sdi: Spinning up disk..............ready
SCSI device sdi: 17774160 512-byte hdwr sectors (9100
MB)
/dev/scsi/host1/bus0/target10/lun0:
sdj: Spinning up disk...............ready
SCSI device sdj: 17774160 512-byte hdwr sectors (9100
MB)
/dev/scsi/host1/bus0/target11/lun0:
sym53c875-1-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0
ns, offset 16)
sdk: Spinning up disk...<6>sym53c875-1-<12,*>: FAST-20
WIDE SCSI 40.0 MB/s (50.0 ns, offset 16)
..<6>sym53c875-1-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s
(50.0 ns, offset 16)
.<6>sym53c875-1-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s
(50.0 ns, offset 16)
.<6>sym53c875-1-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s
(50.0 ns, offset 16)
.<6>sym53c875-1-<12,*>: FAST-20 WIDE SCSI 40.0 MB/s
(50.0 ns, offset 16)
ready
SCSI device sdk: 35548320 512-byte hdwr sectors (18201
MB)
/dev/scsi/host1/bus0/target12/lun0:
sdl: Spinning up
disk.................................................................................................not
responding...
sdl : READ CAPACITY failed.
sdl : status = 1, message = 00, host = 0, driver = 28
Current sd00:00: sns = 70 2
ASC=4c ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x18
0x00 0x00 0x00 0x00 0x4c 0x00 0x01 0x00 0x00 0x00 0x00
0x00 0x01 0x13 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00
sdl : block size assumed to be 512 bytes, disk size
1GB.
/dev/scsi/host1/bus0/target13/lun0:<6>Device 08:b0
not ready.
I/O error: dev 08:b0, sector 0
Device 08:b0 not ready.
I/O error: dev 08:b0, sector 0
unable to read partition table
Attached scsi CD-ROM sr0 at scsi2, channel 0, id 1,
lun 0
sym53c896-2-<1,*>: FAST-10 SCSI 10.0 MB/s (100.0 ns,
offset 15)
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
Attached scsi generic sg6 at scsi0, channel 0, id 15,
lun 0, type 13
Attached scsi generic sg13 at scsi1, channel 0, id 15,
lun 0, type 13
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 16384 buckets,
256Kbytes
TCP: Hash tables configured (established 131072 bind
65536)
IPv4 over IPv4 tunneling driver
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 500k init
Yannick Bertrand
______________________________________________________________________
Post your free ad now! http://personals.yahoo.ca
** Sent via the linuxppc64-dev mail list. See http://lists.linuxppc.org/
More information about the Linuxppc64-dev
mailing list