HRCW on MPC8260

Scott Wood scottwood at
Wed Sep 24 04:50:32 EST 2008

On Fri, Sep 19, 2008 at 05:42:12PM +0530, VenkataKrishna wrote:
> I am working ELDK Kit 4.0 versions in Linux. My target Board is MPC8260
> processor. I generated linux uImage with linux-2.6-denx and is it need hard
> reset configuration words in linux. I don't find HRCW (Hard reset
> configuration word) anywhere in linux. In My target Board we are using Five
> memory device (SRAM, SRAM, Flash) and where can I instalization these memory
> in linux.

The HRCW is generally provided by firmware (U-boot or similar), not the
kernel.  You cannot boot directly into Linux.


More information about the Linuxppc-embedded mailing list