module compilation linux

[Marco Stornelli]

Try ARCH=powerpc (lowercase).

Regards.

VenkataKrishna ha scritto:
>  
> 
> I compiled modules in ELDK 4.0 installed in Linux. I got the  configure
> error in show in the below. How to solve that. What are configure values
> should need compile MPC8260 freescale device driver in linux.
> 
>  
> 
> [root at VenkaKrisha linux-2.6-denx]# make ARCH=PowerPC CROSS_COMPILE=ppc_82xx-
> modules
> 
> :0: error: -m64 not supported in this configuration
> 
> :0: error: -m64 not supported in this configuration
> 
> /opt/eldk/usr/src/linux-2.6-denx/scripts/gcc-version.sh: line 31: printf: #:
> invalid number/opt/eldk/usr/src/linux-2.6-denx/scripts/gcc-version.sh: line
> 31: printf: #: invalid number/bin/sh: line 1: [: too many arguments
> 
> scripts/kconfig/conf -s arch/powerpc/Kconfig
> 
> *
> 
> * Restart config...
> 
> *
> 
> *
> 
> * Linux Kernel Configuration
> 
> *
> 
> 64-bit kernel (PPC64) [N/y/?] (NEW)
> 
>  
> 
>  
> 
> With Regards
> 
>  
> 
> Venkatakrishna Pari
> 
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded

-- 
Marco Stornelli
Embedded Software Engineer
CoRiTeL - Consorzio di Ricerca sulle Telecomunicazioni
http://www.coritel.it

marco.stornelli at coritel.it
+39 06 72582838