Linux on Ml410

[John Linn]

Hi Mojtaba,

Did you build the FPGA bit stream yourself or get it from somewhere?

Specifying ttyS0 means you should have a 16550 UART in the hardware
build, do you?

-- John

-----Original Message-----
From: linuxppc-embedded-bounces+john.linn=xilinx.com at ozlabs.org
[mailto:linuxppc-embedded-bounces+john.linn=xilinx.com at ozlabs.org] On
Behalf Of mojtaba
Sent: Tuesday, May 13, 2008 5:37 AM
To: linuxppc-embedded at ozlabs.org
Subject: Linux on Ml410

Dear all,

I am trying to run linux 1.6.25 on ML410 board. When the system boot I
receive this error:

loaded at:     00400000 004CD19C
board data at: 004CB120 004CB19C
relocated to:  00404050 004040CC
zimage at:     00404E3C 004CA0D1
avail ram:     004CE000 10000000

Linux/PPC load: console=ttyS0,115200 root=/dev/xsa2
Uncompressing Linux...inflate returned FFFFFFFD
exit

I will appreciate it if somebody can kindly answer me?
Regards,
Mojtaba

_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded at ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded