[PATCH] Add Fixed PHY support for ucc_geth

Li Yang LeoLi at freescale.com
Fri Mar 21 19:51:04 EST 2008


> -----Original Message-----
> From: Joakim Tjernlund [mailto:Joakim.Tjernlund at transmode.se] 
> Sent: Tuesday, March 18, 2008 5:47 PM
> To: Netdev; Li Yang; Linuxppc-Embedded at Ozlabs.Org
> Cc: Joakim Tjernlund
> Subject: [PATCH] Add Fixed PHY support for ucc_geth
> 
> The new Fixed PHY method, fixed-link property, isn't
> impl. for ucc_geth which makes fixed PHYs non functional.
> Add support for the new method to restore the Fixed PHY
> functionality.
> 
> Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund at transmode.se>

Signed-off-by: Li Yang <leoli at freescale.com>

---
Ps: This patch depends on the patch "ucc_geth: use correct thread number
for 10/100Mbps link" to apply, which hasn't made to Linus' tree for now
but has already been in Jeff and David's trees.

> ---
> 
> This is a regression as fixed PHYs works in 2.6.23 and I am
> using it.
> 
>  drivers/net/ucc_geth.c |   53 
> +++++++++++++++++++++++++++--------------------
>  1 files changed, 30 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
> index ecc5712..18c8b39 100644
> --- a/drivers/net/ucc_geth.c
> +++ b/drivers/net/ucc_geth.c
> @@ -3836,6 +3836,7 @@ static int ucc_geth_probe(struct 
> of_device* ofdev, const struct of_device_id *ma
>  	struct device_node *phy;
>  	int err, ucc_num, max_speed = 0;
>  	const phandle *ph;
> +	const u32 *fixed_link;
>  	const unsigned int *prop;
>  	const char *sprop;
>  	const void *mac_addr;
> @@ -3926,18 +3927,38 @@ static int ucc_geth_probe(struct 
> of_device* ofdev, const struct of_device_id *ma
>  
>  	ug_info->uf_info.regs = res.start;
>  	ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
> +	fixed_link = of_get_property(np, "fixed-link", NULL);
> +	if (fixed_link) {
> +		ug_info->mdio_bus = 0;
> +		ug_info->phy_address = fixed_link[0];
> +		phy = NULL;
> +	} else {
> +		ph = of_get_property(np, "phy-handle", NULL);
> +		phy = of_find_node_by_phandle(*ph);
>  
> -	ph = of_get_property(np, "phy-handle", NULL);
> -	phy = of_find_node_by_phandle(*ph);
> +		if (phy == NULL)
> +			return -ENODEV;
>  
> -	if (phy == NULL)
> -		return -ENODEV;
> +		/* set the PHY address */
> +		prop = of_get_property(phy, "reg", NULL);
> +		if (prop == NULL)
> +			return -1;
> +		ug_info->phy_address = *prop;
> +
> +		/* Set the bus id */
> +		mdio = of_get_parent(phy);
> +
> +		if (mdio == NULL)
> +			return -1;
>  
> -	/* set the PHY address */
> -	prop = of_get_property(phy, "reg", NULL);
> -	if (prop == NULL)
> -		return -1;
> -	ug_info->phy_address = *prop;
> +		err = of_address_to_resource(mdio, 0, &res);
> +		of_node_put(mdio);
> +
> +		if (err)
> +			return -1;
> +
> +		ug_info->mdio_bus = res.start;
> +	}
>  
>  	/* get the phy interface type, or default to MII */
>  	prop = of_get_property(np, "phy-connection-type", NULL);
> @@ -3982,20 +4003,6 @@ static int ucc_geth_probe(struct 
> of_device* ofdev, const struct of_device_id *ma
>  		ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
>  	}
>  
> -	/* Set the bus id */
> -	mdio = of_get_parent(phy);
> -
> -	if (mdio == NULL)
> -		return -1;
> -
> -	err = of_address_to_resource(mdio, 0, &res);
> -	of_node_put(mdio);
> -
> -	if (err)
> -		return -1;
> -
> -	ug_info->mdio_bus = res.start;
> -
>  	if (netif_msg_probe(&debug))
>  		printk(KERN_INFO "ucc_geth: UCC%1d at 0x%8x 
> (irq = %d) \n",
>  			ug_info->uf_info.ucc_num + 1, 
> ug_info->uf_info.regs,
> -- 
> 1.5.4.3
> 
> 


More information about the Linuxppc-embedded mailing list