No output from SMC1 console with the 2.6.26 kernel (8xx based board)

[Scott Wood]

On Tue, Jul 29, 2008 at 11:33:47AM -0400, Ben Gardiner wrote:
> And my serial console output is stopping around the same point as 
> Matvejchikov. I have baud 9600, so I'm guessing that it's cutoff because 
> of this (please excuse me if this is wrong). NB: the console=ttyS0 
> bootarg is there to get a working console when I  boot back to 2.4.
> <snip console>
> Memory <- <0x0 0x8000000> (128MB)
> ENET0: local-mac-address <- 00:11:40:02:00:18
> CPU clock-frequency <- 0x3f940aa (67MHz)
> CPU timebase-frequency <- 0x1fce17 (2MHz)
> CPU bus-frequency <- 0x1fce170 (33MHz)

Try commenting out calls to cpm_setbrg(), to see if the frequency is bad.

-Scott