[PATCH] Add AMCC Arches 460GT eval board support to platforms/44x

Grant Likely grant.likely at secretlab.ca
Thu Jul 17 00:15:39 EST 2008


On Wed, Jul 16, 2008 at 07:50:25AM -0400, Josh Boyer wrote:
> On Tue, 15 Jul 2008 22:33:26 -0700
> fkan at amcc.com wrote:
> 
> > From: Victor Gallardo <vgallard at amcc.com>
> > 
> > ppc4xx: Add AMCC Arches 460GT eval board support 
> > 
> > Signed-off-by: Victor Gallardo <vgallard at amcc.com>
> 
> From what I can tell, you don't even need this patch or the defconfig.
> Nothing differs at this point from Glacier other than the DTS.  Since
> U-Boot is your loader, it should be able to pass the different DTS to a
> kernel that supports Cayonlands and have no issues.
> 
> > ---
> >  arch/powerpc/platforms/44x/Kconfig  |   18 ++++++++
> >  arch/powerpc/platforms/44x/Makefile |    1 +
> >  arch/powerpc/platforms/44x/arches.c |   76 +++++++++++++++++++++++++++++++++++
> >  3 files changed, 95 insertions(+), 0 deletions(-)
> >  create mode 100644 arch/powerpc/platforms/44x/arches.c
> > 
> > diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
> > index 6abe913..95d1217 100644
> > --- a/arch/powerpc/platforms/44x/Kconfig
> > +++ b/arch/powerpc/platforms/44x/Kconfig
> > @@ -77,6 +77,16 @@ config CANYONLANDS
> >  	help
> >  	  This option enables support for the AMCC PPC460EX evaluation board.
> > 
> > +config ARCHES
> > +	bool "Arches"
> > +	depends on 44x
> > +	default n
> > +	select 460GT
> > +	select PCI
> > +	select PPC4xx_PCI_EXPRESS
> > +	help
> > +	  This option enables support for the AMCC PPC460GT Arches board.
> 
> If you do want to have explicit support for Arches, that's fine.  Look
> at how Yosemite is supported.  It just reuses Bamboo.  You could do the
> same.
> 
> >  config YOSEMITE
> >  	bool "Yosemite"
> >  	depends on 44x
> > @@ -149,6 +159,14 @@ config 460EX
> >  	select IBM_NEW_EMAC_ZMII
> >  	select IBM_NEW_EMAC_TAH
> > 
> > +config 460GT
> > +	bool
> > +	select PPC_FPU
> > +	select IBM_NEW_EMAC_EMAC4
> > +	select IBM_NEW_EMAC_RGMII
> > +	select IBM_NEW_EMAC_ZMII
> > +	select IBM_NEW_EMAC_TAH
> 
> I don't see a reason to add this at all.  460EX and 460GT select the
> same set of options.
> 
> >  # 44x errata/workaround config symbols, selected by the CPU models above
> >  config IBM440EP_ERR42
> >  	bool
> > diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
> > index 774165f..86a4823 100644
> > --- a/arch/powerpc/platforms/44x/Makefile
> > +++ b/arch/powerpc/platforms/44x/Makefile
> > @@ -9,3 +9,4 @@ obj-$(CONFIG_RAINIER)	+= rainier.o
> >  obj-$(CONFIG_WARP)	+= warp.o
> >  obj-$(CONFIG_WARP)	+= warp-nand.o
> >  obj-$(CONFIG_CANYONLANDS) += canyonlands.o
> > +obj-$(CONFIG_ARCHES)	+= arches.o
> 
> Here you would just have:
> 
> obj-$(CONFIG_ARCHES) += cayonlands.o
> 
> > diff --git a/arch/powerpc/platforms/44x/arches.c b/arch/powerpc/platforms/44x/arches.c
> > new file mode 100644
> > index 0000000..6d6aa66
> > --- /dev/null
> > +++ b/arch/powerpc/platforms/44x/arches.c
> 
> And then you don't need this file at all.  Just add a
> "amcc,canyonlands" string to your root node compatible property.

No!  Don't do this because it is not true!

Instead, add your board name to canyonlands.c in canyonlands_probe().
It's not the most scalable solution, but it keeps you from lying about
your hardware in the .dts file.

I'm working on a more scalable solution for this, but for now just add
your specific board to canyonlands_probe().

Cheers,
g.


More information about the Linuxppc-embedded mailing list