merge from arch/ppc to arch/powerpc on lite5200

mejjad lahcen lmejjad at
Thu Jul 10 00:42:09 EST 2008

 Hi all of you,
I am working to port linux2.6.26 on board based on lite5200, but the kernel
hangs here ( see output)
# Booting image at ff000000 ...
   Image Name:   Linux-2.6.26-rc9
   Created:      2008-07-09  14:05:34 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1738816 Bytes =  1.7 MB
   Load Address: 00400000
   Entry Point:  00400550
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ff200000 ...
   Image Name:   ram disk
   Created:      2008-07-09  14:28:18 UTC
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    5878062 Bytes =  5.6 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Ramdisk to 039c3000, end 03f5e12e ... OK
Memory <- <0x0 0x4000000> (64MB)
CPU clock-frequency <- 0x1687d280 (378MHz)
CPU timebase-frequency <- 0x1406f40 (21MHz)
CPU bus-frequency <- 0x501bd00 (84MHz)

zImage starting: loaded at 0x00400000 (sp: 0x03f5ede0)
Allocating 0x3887b8 bytes for kernel ...
gunzipping (0x00000000 <- 0x0040d000:0x00788e30)...done 0x3683e0 bytes
Using loader supplied ramdisk at 0x39c3000-0x3f5e12e
initrd head: 0x1f8b0808

Linux/PowerPC load: root=/dev/ram rw console=ttyPSC0 ramdisk_size=16000
Finalizing device tree... flat tree at 0x795300

I compiled ramdisk with arch/powerpc but I got the same problem, I dont know
if someone has reesolved this issue
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <>

More information about the Linuxppc-embedded mailing list