Trying 10/HALF

[Siva Prasad]

Hi,

 

After booting, my MPC8641 based board keeps printing "Trying 10/HALF"
for ever. I am unable to use the Ethernet, even though there are
interrupts occuring. Based on /proc/interrupts, both tx and rx interrupt
count is increasing, and zero count for enet_error interrupt.

 

I think this is coming from drivers/net/phy/phy.c during
autonegotiation. However, I am not sure how to take care of this.
Appreciate some pointers.

 

Thanks

Siva

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20080109/8c7fa08e/attachment.htm