XUP Virtex II p with Linux 2.4 - Question

[rodolfo]

Hey everybody, 

I'm in trouble;

1) The EDK flow: I set the OS in the Software Plataform Settings to
linux_2_6 version 1.00.a. after that, in OS and Library section I have to
fill out the fields "memory size" , "connected_periphs" , "ramdisk size"
... ?  How would I do it ? 

2) Do I place xparametera_ml300.h in /opt/ELDK/ppc_4xx/usr/src/linux-2.6.15
? if not where?

3) I downloaded "ppc-2006-01-11.iso" from denx (ELDK) website and I'm
trying to follow their instructions for ppc 4xx plataform.
[ website: http://www.denx.de/wiki/view/DULG/ELDK ]

In /opt/ELDK/ppc_4xx/usr/src/u-boot-1.1.4/ I do:

"make distclen" and  "make ml300_config" are ok! After "make all" in  I've
got an error:

a - ppc_longjmp.o
a - ppc_setjmp.o
a - stubs.o
make[1]: *** No rules for processing the target `hello_world.srec', needed
by `all'. Stop.       --> note: "TRANSLATION FROM PORTUGESE"
make[1]: Exiting `/opt/ELDK/ppc_4xx/usr/src/u-boot-1.1.4/examples'
make: ** [examples] Error 2

Can you help me, please?

Thanks in advance,
Rodolfo Galvão.



On Tue, 19 Feb 2008 10:07:54 -0700, "Grant Likely"
<grant.likely at secretlab.ca> wrote:
> On Feb 19, 2008 9:55 AM, rodolfo <rodolfo at lesc.ufc.br> wrote:
>> ok Grant Likely. i have a talk with my professor and he agrees with you.
>> Now i'm reading about ELDK. Following this guide, i will have problems
> with
>> edk version?
> 
> No.  One of the advantages of going with 2.6 is that you no longer
> need to copy the BSP generated by EDK into the linux kernel tree.
> Instead you only need to copy one file; xparameters_ml40x.h
> 
> Cheers,
> g.
> 
> --
> Grant Likely, B.Sc., P.Eng.
> Secret Lab Technologies Ltd.