build is broken

[Bizhan Gholikhamseh (bgholikh)]

> -----Original Message-----
> From: Scott Wood [mailto:scottwood at freescale.com] 
> Sent: Monday, February 04, 2008 8:52 AM
> To: Bizhan Gholikhamseh (bgholikh)
> Cc: linuxppc-embedded at ozlabs.org
> Subject: Re: build is broken
> 
> On Fri, Feb 01, 2008 at 03:23:21PM -0800, Bizhan Gholikhamseh 
> (bgholikh) wrote:
> >   AS      .tmp_kallsyms2.o
> >   LD      vmlinux
> >   SYSMAP  System.map
> >   SYSMAP  .tmp_System.map
> >   BOOTCC  arch/powerpc/boot/treeboot-walnut.o
> > Assembler messages:
> > Error: Internal assembler error for instruction icbt 
> Internal error, 
> > aborting at 
> > 
> /usr/src/RPM/BUILD/crosstool/source/binutils-2.15/gas/config/tc-ppc.c
> > line 1300 in ppc_setup_opcodes
> > Please report this bug.
> 
> Try using a newer toolchain.
> 
> -Scott
>
Thanks Scott, 
That did it, I upgraded the toolchain to the 4.1 and worked fine.

Thanks again,
Bizhan