8360 custom board, ucc_geth TX errors on longer(?) packets

Kim Phillips kim.phillips at freescale.com
Sat Feb 2 06:53:24 EST 2008

On Fri, 01 Feb 2008 12:52:25 -0600
Steven Hein <ssh at sgi.com> wrote:

> The one main difference in this board is how eth0 is wired.
> We have a Broadcom GbE switch part, and UCC1 eth is wired
> directly to that switch (no PHY).   (This where I needed to

sounds like you ran into some h/w errata.  if on rgmii, you might
want to find a way to program the switch for rgmii with internal delay
(8360 rev.2 rgmii-id rx & tx; 8360rev2.1 rgmii-rxid (i.e. for rx
only)).  If not, I'd contact fsl tech support directly.


More information about the Linuxppc-embedded mailing list