[directfb-dev] no output on screen

Denis Oliver Kropp dok at directfb.org
Sat Aug 23 21:49:43 EST 2008


刘小双 wrote:
> hi, all
> I am writing a gfxdriver for Fujitsu mb86296 video card under DirectFB. 
> When I run a example df_fire from DirectFB-examples-1.0.0.tar.gz, there 
> is  no output on the computer screen, it is black completely, and the 
> error result looks like this:
> 
> sh-3.00# ./df_fire
> 
>      =======================|  DirectFB 1.0.0  |=======================
>           (c) 2001-2007  The DirectFB Organization (directfb.org 
> <http://directfb.org>)
>           (c) 2000-2004  Convergence (integrated media) GmbH
>         ------------------------------------------------------------
> 
> (*) DirectFB/Core: Single Application Core. (2008-06-03 03:01) [ TRACE ]
> (*) Direct/Memcpy: Using ppcasm_memcpy()
> (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 502)...
> (*) Direct/Thread: Running 'PS/2 Input' (INPUT, 503)...
> (*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org <http://directfb.org>)
> (*) Direct/Thread: Running 'Keyboard Input' (INPUT, 504)...
> (*) DirectFB/Input: Keyboard 0.9 (directfb.org <http://directfb.org>)
> (*) DirectFB/Graphics: Fujitsu MB86296 0.5 (Atom Create)
> (!) [  493:    0.000] --> Caught signal 11 (at (nil), invalid address) <--
> (-) [  493: -STACK- ]
>   #0  0x0fecef48 in signal_handler () from 
> /mnt/gtkdfb/lib/libdirect-1.0.so.0
> [0xfec4000]
>   #1  0x0ffc5b40 in dfb_screens_initialize () from
> /mnt/gtkdfb/lib/libdirectfb-1.0.so.0 [0xff5f000]

The code you sent is looking fine. Please try a build with debug enabled (assertions).

-- 
Best regards,
   Denis Oliver Kropp

.------------------------------------------.
| DirectFB - Hardware accelerated graphics |
| http://www.directfb.org/                 |
"------------------------------------------"


More information about the Linuxppc-embedded mailing list