How to use ramdisk on the ml300?

[Stu Bershtein]

Yanlong,

As I discovered today, it is not necessary to use u-boot on the ml507 board.  I cannot speak with certainty about the ml300.  For the ml507 the ramdisk image gets saved as a separate section in the elf file that is downloaded with the zImage.  In the ml507 case the image is a gzipped ext2 filesystem.  Makes a very tidy package I'm sure you will agree! 

Stu



-----Original Message-----
From: linuxppc-embedded-bounces+sbershtein=quantum3d.com at ozlabs.org on behalf of yanlong wang
Sent: Wed 8/13/2008 8:08 PM
To: linuxppc-embedded at ozlabs.org
Subject: How to use ramdisk on the ml300?
 
      If i want use ramdisk on the ml300 , i must use u-boot in my system ?
     many thanks
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded at ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded