SecretLab 2.6.24 with USB

[Aaron Sells]

Peter Korsgaard wrote:
> I don't see anything with platform devices for the c67x00 driver.

I added the relevant struct information.  The patch is attached.

> Either you do this by hand or you
> create XPAR_* macros which take the needed info out of xparameter.h
> (sorry, I don't have an xparameters.h with those defines at hand).

I generate the xparameters_ml403.h file using Xilinx's EDK base system 
builder wizard.  However, the wizard does not automatically enable the 
Cypress device to be interrupt driven.  I have manually done this as 
described in the attached patch.

The resulting xparameters_ml403.h has the following defines:

sellsa at SS-SBIR-Ubuntu:~/spacesuit/linux-2.6-xlnx$ cat 
arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h | grep USB
/* Definitions for peripheral CYPRESS_USB */
#define XPAR_CYPRESS_USB_PRH0_BASEADDR 0x80800000
#define XPAR_CYPRESS_USB_PRH0_HIGHADDR 0x8080FFFF
#define XPAR_SYSTEM_USB_INT_PIN_MASK 0X000001
#define XPAR_XPS_INTC_0_SYSTEM_USB_INT_PIN_INTR 0

When I boot the Xilinx ML403 board up, I get the following:

[    9.256329] ------------[ cut here ]------------
[    9.260000] Badness at drivers/usb/c67x00/c67x00-ll-hpi.c:244
[    9.260000] NIP: c01b5d6c LR: c01b5d60 CTR: c00170f4
[    9.260000] REGS: c3c19d70 TRAP: 0700   Not tainted 
(2.6.24-rc8-xlnx-dirty)
[    9.260000] MSR: 00029030 <EE,ME,IR,DR>  CR: 24000082  XER: 20000073
[    9.260000] TASK = c3c178a0[1] 'swapper' THREAD: c3c18000
[    9.260000] GPR00: 00000001 c3c19e20 c3c178a0 00000000 c032f518 
c0372730 27b38fa6 00000001
[    9.260000] GPR08: 00000000 00200200 c3d2b164 c3d2b164 24000082 
ffffcd64 c02d4c5c c02d4c6c
[    9.260000] GPR16: c02d4c90 c02d4c98 c02d4ca8 c02d4cd4 c02d4ce8 
00000000 c02d7114 c0370e78
[    9.260000] GPR24: c0360000 c02d4c54 c0330724 00000000 c3d2b148 
00000000 c3d2b140 c0330708
[    9.260000] NIP [c01b5d6c] c67x00_ll_reset+0x48/0x88
[    9.260000] LR [c01b5d60] c67x00_ll_reset+0x3c/0x88
[    9.260000] Call Trace:
[    9.260000] [c3c19e20] [c01b5d60] c67x00_ll_reset+0x3c/0x88 (unreliable)
[    9.260000] [c3c19e40] [c02885e0] c67x00_drv_probe+0x16c/0x2d8
[    9.260000] [c3c19e70] [c01694b0] platform_drv_probe+0x20/0x30
[    9.260000] [c3c19e80] [c01674f8] driver_probe_device+0xec/0x194
[    9.260000] [c3c19ea0] [c0167750] __driver_attach+0x88/0xf4
[    9.260000] [c3c19ec0] [c0166648] bus_for_each_dev+0x58/0x98
[    9.260000] [c3c19ef0] [c01672f4] driver_attach+0x24/0x34
[    9.260000] [c3c19f00] [c016706c] bus_add_driver+0xb4/0x218
[    9.260000] [c3c19f20] [c0167a64] driver_register+0x78/0x10c
[    9.260000] [c3c19f40] [c016982c] platform_driver_register+0x9c/0xac
[    9.260000] [c3c19f50] [c035fa44] c67x00_init+0x18/0x28
[    9.260000] [c3c19f60] [c034e200] kernel_init+0xfc/0x294
[    9.260000] [c3c19ff0] [c00047d8] kernel_thread+0x44/0x60
[    9.260000] Instruction dump:
[    9.260000] 90010024 480d56c5 38800000 7fa3eb78 6084fa50 4bfff2f5 
387d0020 388004e2
[    9.260000] 480d48d9 707dffff 7c000026 54001ffe <0f000000> 3c00ffff 
7fbd00d0 60000005
[   11.316192] c67x00 c67x00.0: Device reset failed
[   11.364172] c67x00: probe of c67x00.0 failed with error 65531

Sam, since you have this working, any help would be greatly appreciated. 
  What else do I need to do in order to get USB host working on this board?
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: virtex_devices.c.patch
URL: <http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20080424/1f821efc/attachment.asc>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: XilinxEDKUSBInterrupts.patch
URL: <http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20080424/1f821efc/attachment.txt>