[PATCH] phy: export phy_mii_ioctl

[Pedro Luis D. L.]

Juergen wrote:

>
>Pedro,
>
>On Wednesday 19 September 2007 10:54, Pedro Luis D. L. wrote:
>> I´m also working with a Phytec pcm030, but I can´t get it booted...
>> Which kernel are you using?
>> I tried to apply the 7 bestcomm patches from Sylvain and patch over these
>> with this new ones that Domen released. The base kernel I´m using is
>> 2.6.22.6 from kernel.org.
>> Although I used the patch that creates pcm030.c in arch/platforms/52xx/ and
>> compiled using this file, it gets halted at booting time.
>>
>> Bytes transferred = 5091 (13e3 hex)
>> ## Booting image at 00500000 ...
>>    Image Name:   Linux-2.6.22.6
>>    Created:      2007-09-19   8:53:02 UTC
>>    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
>>    Data Size:    1196911 Bytes =  1.1 MB
>>    Load Address: 00000000
>>    Entry Point:  00000000
>>    Verifying Checksum ... OK
>>    Uncompressing Kernel Image ... OK
>>    Booting using flat device tree at 0x400000
>>
>> (No more output and boot is halted)
> 
>Check your oftree! Most of the time this behaviour means its a wrong oftree in 
>use.

I´m using an specific pcm030.dts oftree that works for the 2.6.20 kernel. I´m not quite familiar with the oftree stuff, but I thought it should work also for the 2.6.22.6.
Is there any other dts file? Where can I find it?

Pedro.

PD: Sorry. I sent the previous message to Jon, Domen and someone else too besides the list. I had some problems with the browser... Even sent twice the message :-(

>Juergen
> 
>-- 
>Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de
>Pengutronix - Linux Solutions for Science and Industry
>    Handelsregister: Amtsgericht Hildesheim, HRA 2686
>        Vertretung Sued/Muenchen, Germany
>   Phone: +49-8766-939 228 |  Fax: +49-5121-206917-9
>

_________________________________________________________________
Llama a tus amigos de PC a PC: ¡Es GRATIS!
http://get.live.com/messenger/overview