Problem booting linux with device tree table

[Mustafa Cayir]

Hi all,

I am trying to boot TQM5200 with linux 2.6 kernel. i am using latest version of linux and u-boot from denx. And compiled with ELDK4.1 

i use dtc compiler with following command:
dtc -O dtb -o tqm5200.dtb -b 0 tqm5200.dts

Booting process gives following error and reset the board.

WARNING: could not create /chosen FDT_ERR_NOSPACE.
ERROR: /chosen node create failed - must RESET the board to recover.

Regards.



Using FEC ETHERNET device
TFTP from server 10.18.2.83; our IP address is 10.18.5.44
Filename 'uImage'.
Load address: 0x200000
Loading: #################################################################
         ####################################
done
Bytes transferred = 1473038 (167a0e hex)
Using FEC ETHERNET device
TFTP from server 10.18.2.83; our IP address is 10.18.5.44
Filename 'tqm5200.dtb'.
Load address: 0x400000
Loading: #
done
Bytes transferred = 3816 (ee8 hex)
## Booting image at 00200000 ...
   Image Name:   Linux-2.6.23-rc6-gf695e369
   Created:      2007-09-19   1:31:43 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1472974 Bytes =  1.4 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
   Booting using the fdt at 0x400000
WARNING: could not create /chosen FDT_ERR_NOSPACE.
ERROR: /chosen node create failed - must RESET the board to recover.




-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20070918/78b901a6/attachment.htm