SPI INT line

[Clemens Koller]

Nicholas Hickman schrieb:
> We are developing a system around the mpc8270.  On this system we are
> using an ISDN controller connected to the SPI interface of the 8270.
> For the INT line coming from the controller, should this be connected to
> one of the IRQ lines that we typically use for PCI bus, or should we
> connect it to one of the GPIO Group C pins?  Currently we have it to
> IRQ4, but I am worried that this is incorrect.

I would use an otherwise unused (even in reference 82xx platforms)
IRQ line and have a look into the kernel and see which
IRQs are free so minimize/eliminate extra patches.

Regards,
-- 
Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany

http://www.anagramm-technology.com
Phone: +49-89-741518-50
Fax: +49-89-741518-19