PCI on Lite5200/Icecube, known issues?

Wolfgang Grandegger wg at grandegger.com
Fri Oct 26 02:21:15 EST 2007

Wolfgang Grandegger wrote:
> Grant Likely wrote:
>> On 10/25/07, Wolfgang Grandegger <wg at grandegger.com> wrote:
>>> Hello,
>>> The access to PCI memory space does not to work (I allways read 0xff) on
>>> my Icecube-Eval-Board. Are there any known issues/bugs with using the
>>> PCI on the Lite5200/Icecube board with 2.6.23? Has it been tested? I
>>> realized, that CONFIG_PCI is not set in the default configuration.
>> arch/ppc or arch/powerpc?
>> I'm not a PCI expert, but I just fired up my Lite5200 with a couple of
>> eth adapters plugged in and the devices are usable.  This is a
>> 2.6.24-rc1 arch/powerpc kernel.
> I'm using a 2.6.23 arch/powerpc kernel. And my eepro100 card does not 
> work either:
> e100: probe of 0000:00:18.0 failed with error -11
> It looks like that 2.6.23 needs some more patches.

Indeed, it works with 2.6.24-rc1:

e100: eth0: e100_probe: addr 0xa0000000, irq 16, MAC addr 00:0e:0c:74:8c:f2


More information about the Linuxppc-embedded mailing list