Linux booting problem on Xilinx ppc

[Grant Likely]

On 10/17/07, aauer1 <aauer1 at gmx.at> wrote:
>
>
> Grant Likely-2 wrote:
> >
> > On 10/17/07, aauer1 <aauer1 at gmx.at> wrote:
> >> Now, I know that the kernel boots but I don't get an output with my
> >> Xilinx
> >> UartLite module. Are there some kernel modules which must be activated??
> >> Btw. I have used the Linux-2.6-virtex kernel from
> >> http://git.secretlab.ca/git/ and another Kernel (2.6.23 from kernel.org)
> >> -
> >> both with the same result.
> >
> > Post the output of __log_buf here please.
> >
> >
>
> Here is my dump of the __log_buf:
> ======================
> <5>[    0.000000] Linux version 2.6.23-rc2
> (aauer at servitus.student.iaik.tugraz.at) (gcc version 4.0.0 (DENX ELDK 4.1
> 4.0
> .0)) #8 Wed Oct 17 20:05:28 CEST 2007
> <6>[    0.000000] Xilinx ML403 Reference System (Virtex-4 FX)
> <7>[    0.000000] Entering add_active_range(0, 0, 16384) 0 entries of 256
> used
> <4>[    0.000000] Zone PFN ranges:
> <4>[    0.000000]   DMA             0 ->    16384
> <4>[    0.000000]   Normal      16384 ->    16384
> <4>[    0.000000] Movable zone start PFN for each node
> <4>[    0.000000] early_node_map[1] active PFN ranges
> <4>[    0.000000]     0:        0 ->    16384
> <7>[    0.000000] On node 0 totalpages: 16384
> <7>[    0.000000]   DMA zone: 128 pages used for memmap
> <7>[    0.000000]   DMA zone: 0 pages reserved
> <7>[    0.000000]   DMA zone: 16256 pages, LIFO batch:3
> <7>[    0.000000]   Normal zone: 0 pages used for memmap
> <7>[    0.000000]   Movable zone: 0 pages used for memmap
> <4>[    0.000000] Built 1 zonelists in Zone order.  Total pages: 16256
> <5>[    0.000000] Kernel command line: console=ttUL0 root=/dev/xsysace2 rw

Typo!  :-)

Try  "ttyUL0"

g.


-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195