mpc 860 boot linux2.6.23 problem

[Wolfgang Denk]

In message <4713A08C.3060204 at freescale.com> you wrote:
> keng_629 wrote:
> >  
> > i am proting linux2.63.23 to mpc860t board with uboot1.1.4 as bootloader.
> > my bootargs is root=/dev/ram rw init=/linuxrc.
> > i use debugger to see the regedits, find pc is run in the cpu_idle().
> > what is wrong with my kernel, plese give me some advice.thank you .
> 
> Posting the same thing over and over again isn't going to change the 
> response.  Try head-of-Linus's-git, make sure you're using arch/powerpc, 
> and post the device tree you're using.  Without more information, we 
> can't help you.

Just to point out the obvious: U-Boot 1.1.4 is *way* too old to
support any device-tree based kernel, so the fist step is to update
U-Boot to a somewhat recent version (i. e. 1.3.0-rcX).

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Faith: not *wanting* to know what is true."    - Friedrich Nietzsche