2.6 kernel hangs after loading device tree

Clemens Koller clemens.koller at anagramm.de
Tue Nov 20 22:08:53 EST 2007


 > charanya venkatraman wrote:
 >> Hi all
 >>        Sorry about the previous mail.Got sent  by mistake.
 >>
 >> Iam using the 2.6.22.5 kernel on MPC 8560 and MPC8540 on my custom
 >> board.Mykernel hangs after loading the device tree in both the
 >> processors. There is
 >> no output on the serial port after loading the device tree.

 >> I have tried the following console arguments:
 >> MPC8540: bootargs root=/dev/ram rw console=ttyS0,115200
 >> MPC8560:bootargs root=/dev/ram rw console=ttyCPM0,115200
 >>
 >> Any help on this issue??

Maybe your problem is related to... See the thread at:
http://ozlabs.org/pipermail/linuxppc-embedded/2007-November/028968.html
(I use Paulus' git tree.)

Regards,

Clemens Koller
__________________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com


More information about the Linuxppc-embedded mailing list