AW: BDI2000 configuration file for MPC8313E-RDB

[Frank Prepelica]

Hi Leonid,

firstly, thanks for reply!

But, are you sure that I cannot access NAND memory via 
BDI2000? Because I used BDI2000 with the MPC8343M Board 
and there is "only" 64MB NAND memory. Thus I stored the 
U-Boot (image was broken) into the flash memory.

Frank


-----Ursprüngliche Nachricht-----
Von: Leonid [mailto:Leonid at a-k-a.net] 
Gesendet: Mittwoch, 16. Mai 2007 22:37
An: Frank Prepelica; linuxppc-embedded at ozlabs.org
Betreff: RE: BDI2000 configuration file for MPC8313E-RDB

AFAIK, BDI2000 doesn't support NAND... of course you can load some code
which has NAND support into RAM (even u-boot if compiled properly) and
thus program NAND flash. But BDI firmware cannot program NAND directly.

Leonid.

________________________________________
From: linuxppc-embedded-bounces+leonid=a-k-a.net at ozlabs.org
[mailto:linuxppc-embedded-bounces+leonid=a-k-a.net at ozlabs.org] On Behalf
Of Frank Prepelica
Sent: Wednesday, May 16, 2007 7:25 AM
To: linuxppc-embedded at ozlabs.org
Subject: BDI2000 configuration file for MPC8313E-RDB

Hi all,

maybe this is not the appropriate mailing list, sorry for that!

but, does anyone got a working BDI2000 configuration file + reg.
definitions for MPC8313E-RDB
to get access to NAND memory? I got one but there's only access to NOR
memory.

Many thanks in advance!

Best regards
Frank