Using Cypress EZ-Host on ML403/5

Peter Mendham petermendham at computing.dundee.ac.uk
Wed May 2 19:05:08 EST 2007


Peter Korsgaard wrote:
>>> Has anyone had the Cypress EZ-Host chip working as a USB host under
>>> Linux?  It's the one that comes fitted as standard to ML403 and
>>> ML405 boards (probably other Xilinx boards too).  If not, can
>>> anyone tell me where I should start?  Any advice at all?  Our own
>>> embedded device needs to have USB host support and we are using an
>>> ML40x for development so the EZ-Host is the preferred solution as
>>> we can prototype it.
>>>       
> Grant> It's on my task list to get working.  I could certainly use
> Grant> some help.
>
> I have written a 2.6 USB host driver for the Cypress
> EZ-Host/EZ-Otg. It's basically working, but needs a bit more
> cleanup. I hope to be able to submit it next week.
>   
Peter,

Are you any further forward with this?  Is there anything I could see 
(however pre-release)?  Is there anything I can do to help?

Many thanks,
-- Peter


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.




More information about the Linuxppc-embedded mailing list