TQM 860L, 64MB RAM, ELDK4.1, TQM860L, Kernel 2.6.19

Thomas Maenner tmaenner at aehr.com
Sat Mar 24 04:26:31 EST 2007


Apparently I was not aware, that the TQ8xx are not supported by 2.6...
Will try the linuxppc_2_4_devel version from your cvs repository.

Thanks
Tom

On Thursday 22 March 2007 14:26, Wolfgang Denk wrote:
> In message <200703221410.37767.tmaenner at aehr.com> you wrote:
> > Tried out the following u-boot "setting":
> > setenv ramargs setenv bootargs ramdisk_size=6144 root=/dev/ram
> > console=ttyCPM0 rw
> >
> > No change; still no output in the console
>
> Then buy a debugger and dig into it...
>
> > Note that my module has 64MB, rather that 16; I thought it doesn't
> > matter, or?
>
> It doesn't.
>
> You are aware that TQM8xxL is not yet supported in the context of the
> 2.6 Linux kernel, aren't you? [And we will  not  support  it  in  the
> ARCH=ppc context any more.]
>
> Best regards,
>
> Wolfgang Denk

-- 
Thomas Maenner
E-Mail: mailto:tmaenner at aehr.com



More information about the Linuxppc-embedded mailing list