ELDK4.1, TQM860L, Kernel 2.6.19

[Thomas Maenner]

Oops... Thanks Vitaly for the reminder.
Compiles fine now
Tom

On Tuesday 20 March 2007 08:26, Vitaly Bordug wrote:
> On Mon, 19 Mar 2007 21:21:01 -0700
>
> Thomas Maenner <tmaenner at aehr.com> wrote:
> > Hi,
> >
> > I've downloaded ELDK4.1 and tried to compile the included kernel 2.6.19.2
> > with:
> > make mrproper
> > make TQM860L_defconfig
> > make
> > (No other changes)
> >
> > At the end of the compile I get:
> > ---snip---
> >   UIMAGE  arch/ppc/boot/images/uImage
> > Image Name:   Linux-2.6.19.2
> > Created:      Mon Mar 19 15:50:14 2007
> > Image Type:   PowerPC Linux Kernel Image (gzip compressed)
> > Data Size:    979098 Bytes = 956.15 kB = 0.93 MB
> > Load Address: 0x00000000
> > Entry Point:  0x00000000
> >   Image: arch/ppc/boot/images/uImage is ready
> >   AS      arch/ppc/boot/simple/head.o
> >   AS      arch/ppc/boot/simple/relocate.o
> >   CC      arch/ppc/boot/simple/misc-embedded.o
> >   CC      arch/ppc/boot/simple/embed_config.o
> > arch/ppc/boot/simple/embed_config.c:31: warning: 'bdinfo' defined but not
> > used arch/ppc/boot/simple/embed_config.c:44: warning: 'def_enet_addr'
> > defined but not used
> >   CC      arch/ppc/boot/simple/m8xx_tty.o
> > arch/ppc/boot/simple/m8xx_tty.c:32: error: static declaration of 'cpmp'
> > follows non-static declaration
> > include/asm/commproc.h:74: error: previous declaration of 'cpmp' was here
> > make[2]: *** [arch/ppc/boot/simple/m8xx_tty.o] Error 1
> > make[1]: *** [simple] Error 2
> > make: *** [zImage] Error 2
> > -------
> >
> > Just in order to get it to compile, I took out static in
> > arch/ppc/boot/simple/m8xx_tty.c:
> > line 32: cpm8xx_t        *cpmp = (cpm8xx_t *)&(((immap_t
> > *)IMAP_ADDR)->im_cpm);
> >
> > BTW, same thing happens if TQM823 config is used.
> >
> > I'm probably doing something wrong here... ;)
>
> Well, after make foo_defconfig I usually do make uImage since with u-boot
> equipped boards full zImage is not required.

-- 
Thomas Maenner
E-Mail: mailto:tmaenner at aehr.com