UartLite for MontaVista - virtex4

Jantira Hengmeechai (Tai) Hengmeej at linsys.ca
Wed Mar 14 08:28:53 EST 2007


 
Hi all,
 
I am implementing the MontaVista linux previewkit a 2.4 Linux kernel for a 
PowerPC405 
on  a custom board based on ML403. Our design used Uartlite instead of Uart, 
I set the 
boot parameter in the kernel to console=ttl0,9600. The system uses a ramdisk 
image.
The problem is after linux trying to boot, there are error messages as shown 
below:
 
 
loaded at: 00400000 005E41E0
board data at: 005E1138 005E1150
relocated to: 0040530C 00405324
zimage at: 004058D7 0047B4A3
initrd at: 0047C000 005E0591
avail ram: 005E5000 04000000
 
Linux/PPC load: root=/dev/ram rw console=ttl0,9600 console=/dev/ttl0
Uncompressing Linux...done.
Now booting the kernel
Linux version 2.4.20_mvl31-ml300 (devel at localhost.localdomain) (gcc version 
3.3.1 (MontaVista 3.3.1-3.0.10.0300532 2003-12-24)) #23 Tue Mar 13 14:53:19 
EDT 2007
Xilinx Virtex-II Pro port (C) 2002 MontaVista Software, Inc. 
(source at mvista.com)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram rw console=ttl0,9600 console=/dev/ttl0
Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFF000
Calibrating delay loop... 296.55 BogoMIPS
Memory: 62164k available (868k kernel code, 252k data, 48k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Disabling the Out Of Memory Killer
devfs: v1.12c (20020818) Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Tracer: Initialization complete 
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
IP-Config: No network devices available.
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 1425k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 48k init
serial console detected. Disabling virtual terminals.
Xilinx OS Independent Code XAssert: xuartlite.c:195
Code may crash due to unhandled errors.
Xilinx OS Independent Code XAssert: xuartlite.c:195
Code may crash due to unhandled errors.
Xilinx OS Independent Code XAssert: xuartlite.c:195
Code may crash due to unhandled errors.
Xilinx OS Independent Code XAssert: xuartlite.c:195
Code may crash due to unhandled errors.
 
 
We don't know what is causing the problem, any help would be appreciated.
 
Thanks,
Tai.
 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jantira Hengmeechai (Tai)
Embedded Software Developer
 
Linear Systems Ltd.
1717 Dublin Avenue, Unit 1
Winnipeg., MB., R3H 0H2, Canada 
Phone: 1 204 632 4300 ext.23, Fax: 1 204 697 2417
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20070313/eff6fe65/attachment.htm 


More information about the Linuxppc-embedded mailing list