[PATCH 2/7] mpc52xx suspend: UART

[Domen Puncer]

MPC52xx uart power management.
Not sure how exactly this should be written, but this seems
to work, and works around a few seconds delay in resume.


Signed-off-by: Domen Puncer <domen.puncer at telargo.com>

Index: grant.git/drivers/serial/mpc52xx_uart.c
===================================================================
--- grant.git.orig/drivers/serial/mpc52xx_uart.c
+++ grant.git/drivers/serial/mpc52xx_uart.c
@@ -418,6 +418,22 @@ mpc52xx_uart_verify_port(struct uart_por
 	return 0;
 }
 
+/* just Reenable TX and RX */
+static void mpc52xx_uart_pm(struct uart_port *port, unsigned int state, unsigned int oldstate)
+{
+	struct mpc52xx_psc __iomem *psc = PSC(port);
+	unsigned long flags;
+
+	/* Get the lock */
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Reenable TX & RX */
+	out_8(&psc->command,MPC52xx_PSC_TX_ENABLE);
+	out_8(&psc->command,MPC52xx_PSC_RX_ENABLE);
+
+	/* We're all set, release the lock */
+	spin_unlock_irqrestore(&port->lock, flags);
+}
 
 static struct uart_ops mpc52xx_uart_ops = {
 	.tx_empty	= mpc52xx_uart_tx_empty,
@@ -432,8 +448,10 @@ static struct uart_ops mpc52xx_uart_ops 
 	.startup	= mpc52xx_uart_startup,
 	.shutdown	= mpc52xx_uart_shutdown,
 	.set_termios	= mpc52xx_uart_set_termios,
-/*	.pm		= mpc52xx_uart_pm,		Not supported yet */
-/*	.set_wake	= mpc52xx_uart_set_wake,	Not supported yet */
+
+	.pm		= mpc52xx_uart_pm,
+/*	.set_wake	= mpc52xx_uart_set_wake,*/
+
 	.type		= mpc52xx_uart_type,
 	.release_port	= mpc52xx_uart_release_port,
 	.request_port	= mpc52xx_uart_request_port,