ping command

[Ben Warren]

Nethra,

On Wed, 2007-07-25 at 02:29 -0700, Nethra wrote:
> hi,
> 
> I m using custom board same as eval board MPC8272ADS board.
> 
> IP assigned for both ethernets are...
> 
>               ifconfig eth1 192.168.33.135 up
> 	 ifconfig eth1 netmask 255.255.248.0
>  	 route add default gw 192.168.32.47 eth1
>  
> 
> 	 ifconfig eth0 192.168.178.89 up
> 	 ifconfig eth0netmask 255.255.255.0
> 	 route add default gw 192.168.178.47 eth0
> 
> but if i try for ping 192.168.33.135 command pails by the server of 178
> series
> similarly ping 192.168.178.89 command pails by the server of 33 series..
> 
> what is the problem..and whre i m going wrong..?

What does your routing table show?  (route -n).  It wouldn't hurt to
also post the output of ifconfig for both interfaces.

regards,
Ben