[PATCH] jffs2 file system
Nethra
nethra_gmit at yahoo.co.in
Mon Feb 26 14:28:55 EST 2007
i m getting same error after disabling FTL. Yes partions are correct..here
is flinfo output
=> flinfo
Bank # 1: Sharp 28F016SC (16 Mbit, 32 x 64K)
Size: 8 MB in 32 Sectors
Sector Start Addresses:
FF800000 FF840000 FF880000 FF8C0000 FF900000
FF940000 FF980000 FF9C0000 FFA00000 FFA40000
FFA80000 FFAC0000 FFB00000 FFB40000 FFB80000
FFBC0000 FFC00000 FFC40000 FFC80000 FFCC0000
FFD00000 FFD40000 FFD80000 FFDC0000 FFE00000
FFE40000 FFE80000 FFEC0000 FFF00000 (RO) FFF40000 (RO)
FFF80000 FFFC0000
nethra
[...]
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 50MHz system bus speed for PIO modes; override with
> idebus=xx
> elevator: using anticipatory as default io scheduler
> $Id: ftl.c,v 1.55 2005/01/17 13:47:21 hvr Exp $
Flash Translation Layer? JFFS2 does not need it (I believe).
> physmap flash device: 800000 at ff800000
> RedBoot partition parsing not available
> Using physmap partition definition
> Creating 4 MTD partitions on "phys_mapped_flash":
> 0x00000000-0x00600000 : "User FS"
> mtd: Giving out device 0 to User FS
> ftl_cs: FTL header not found.
Disable the FTL when you try to use the content as JFFS2!
> 0x00600000-0x00700000 : "uImage"
> mtd: Giving out device 1 to uImage
> ftl_cs: FTL header not found.
> 0x00700000-0x00740000 : "bootloader"
> mtd: Giving out device 2 to bootloader
> ftl_cs: FTL header not found.
> 0x00740000-0x00780000 : "bootloader env"
> mtd: Giving out device 3 to bootloader env
> ftl_cs: FTL header not found.
Are these partitions correct? I cannot see where the definitions comes from.
Juergen
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded at ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
--
View this message in context: http://www.nabble.com/jffs2-file-system-tf3271928.html#a9153024
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
More information about the Linuxppc-embedded
mailing list