jffs2 file system

[Juergen Beisert]

MTD partitions and partition commandline are enabled:

> CONFIG_MTD_PARTITIONS=y
> # CONFIG_MTD_REDBOOT_PARTS is not set
> CONFIG_MTD_CMDLINE_PARTS=y
[...]
>
> on evaluation (PQ2FADS-ZU) board....
> --------------------------------------------
> setenv ipaddr 192.168.178.234
> setenv serverip 192.168.178.110
> setenv ethaddr 00:99:23:44:ad:de
> setenv bootcmd 'tftpboot 0x1000000 jffsenabled\;bootm 0x1000000\;'
> setenv bootargs root=/dev/mtdblock0 rootfstype=jffs2
> ip=192.168.174.231:192.168.178.110:192.168.174.47:255.255.255.0:cashel:eth1
>:off

But where is your commandline that describes the partitions in your flash?

Juergen