device tree / how to build/compile & use with u-boot to boot uImage?

[David Gibson]

On Fri, Feb 09, 2007 at 05:25:51PM -0500, Jerry Van Baren wrote:
> Morrison, Tom wrote:
> > All,
> > 
> > Sorry for my ignorance here, but we have upgraded our kernel from
> > 2.6.11.xx to 2.6.20-rcx (using a specific git-branch for the mpc85xx) 
> > to run on the MPC8548CDS eval board (using default options provided 
> > by this branch for this eval board). I successfully compiled/loaded the 
> > uImage, but it hangs after decompression (with root=/dev/nfs)
> > 
> > Also, I was told to upgrade our u-boot source code (with another git 
> > branch for to the mpc85xx) and successfully get to the u-boot prompt.
> > 
> > From googling through the lists - it seems that I need to build a 
> > device tree blob and pass that device tree to the kernel in some
> > fashion? 
> > 
> > I tried to compile the default dts image (using the dtc compiler 
> > installed by LTIB), but it is complaining about no '/chosen' in 
> > the definition:
> > 
> >   <path>/dtc -I dts -O dtb - -o mpc8548cds.dtb -V 16 dts/mpc8548cds.dts
> 
> Trivia: the no "/chosen" warning can be ignored.  The u-boot command 
> "bootm" generates the "/chosen" branch when you run the command and it 
> boots linux.
> 
> Note: You want version 16 (or better?) for the fdt blob.  I believe the 
> dtc defaults to this now, but it wasn't always that way.

Actually you want version 17 - just as soon as I get around to
implementing that in dtc.  v16 and v17 have no differences that the
kernel looks at though, so it doesn't really matter.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson