zImage.elf loads but does not start
Mirek23
miroslaw.dach at psi.ch
Tue Apr 24 01:12:00 EST 2007
I have revised the xparameters_ml403.h and the setup of the FPGA part. I have
found that the interrupt for the RS232 was not configured. Right now I was
able to come to the point when the kernel was uncompressed but it did not
start:
loaded at: 00400000 004F9138
board data at: 004F7120 004F7138
relocated to: 00404064 0040407C
zimage at: 00404DF1 004F6BBB
avail ram: 004FA000 04000000
Linux/PPC load: console=ttl0,9600 ip=129.129.129.29 root=/dev/ram rw
Uncompressing Linux...done.
Now booting the kernel
Does anybody has an idea what could be wrong?
Best Regards
Mirek
--
View this message in context: http://www.nabble.com/zImage.elf-loads-but-not-starts-tf3607582.html#a10142161
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
More information about the Linuxppc-embedded
mailing list