HOTO start with linux 2.6.* and ML403

[Mohammad Sadegh Sadri]

oh yes
completely correct andrei
i should have mention that , but i forgot.
thanks


-----Original Message-----
From:	"Andrei Konovalov" <akonovalov at ru.mvista.com>
Sent:	April 12, 2007 3:30 PM
To:	"Mohammad Sadegh Sadri" <mamsadegh at hotmail.com>
Cc:	"miroslaw.dach at psi.ch" <miroslaw.dach at psi.ch>, "Linux PPC Linux PPC" <linuxppc-embedded at ozlabs.org>
Subject:	Re: HOTO start with linux 2.6.* and ML403

Mohammad Sadegh Sadri wrote:
<snip>
> from all of the files generated there you will need just xparameters.h and xparameters_ml403.h and nothing more
> if using mvista source, you will not even need these two files the files available in the source are ok themselves

- they are OK if you use ML403 and the EDK reference design for this board.
   For custom FPGA configuration you should use the EDK generated xparameters_ml403.h (if you
   use EDK to build the bitstream).

Thanks,
Andrei