RE: Unable to boot linux on Xilinx ML403 board

[Mohan Krishna T]

The zImage.initrd.elf is of size 3.4MB. I am getting hanged only when I am
using DMA for Ethernet. Booting is going fine when I am using FIFO Mode.


Thanks
Mohan Krishna

-----Original Message-----
From: glikely at gmail.com [mailto:glikely at gmail.com] On Behalf Of Grant Likely
Sent: Tuesday, September 26, 2006 7:09 PM
To: Mohan Krishna T
Cc: Peter Ryser; linuxppc-embedded at ozlabs.org
Subject: Re: Unable to boot linux on Xilinx ML403 board

On 9/26/06, Mohan Krishna T <tmk at cmcltd.com> wrote:
> I have tried the option you have suggested but couldn't boot successfully.
I
> tried to debug where exactly the kernel is getting hanged. I could found
> that its hanging in gunzip() function call. It is never coming out of loop
> that decompress the ramdisk image.

How large is you zImage.embedded?

-- 
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195



DISCLAIMER

“The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you"