[PATCH 1/2] Add MPC52xx Interrupt controller support for ARCH=powerpc

[Nicolas DET]

Benjamin Herrenschmidt wrote:
> On Tue, 2006-10-31 at 08:49 +0100, Nicolas DET wrote:
> 
>> In this case: shouldn't the platform init correctly setup the hw instead 
>> of the Firmware?
> 
> No. The device-tree contains the polarity information, it gets passed to
> the PIC driver via set_irq_type() anyway so there is no need in theory
> to have the HW initialized by the firmware if that is implemented. In
> the case where it's not, however, you indeed need to make sure the
> firmware have programmed the same settings in the HW as are exposed in
> the device-tree.
> 

In my point of view, the Firmware main task is to init the HW. I do not 
think it's a good idea to overwrite firmware hw settings in the common 
code. In my mind, this should be done in platform specific area.

Regards,
-------------- next part --------------
A non-text attachment was scrubbed...
Name: nd.vcf
Type: text/x-vcard
Size: 249 bytes
Desc: not available
Url : http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20061031/7e1b412e/attachment.vcf