[PATCH] General CHRP/MPC5K2 platform support patch

[Grant Likely]

On 10/25/06, Paul Mackerras <paulus at samba.org> wrote:
> Nicolas DET writes:
>
> >       if (machine && strncmp(machine, "Pegasos", 7) == 0) {
> >               _chrp_type = _CHRP_Pegasos;
> > +     } else if (machine && strncmp(machine, "EFIKA5K2", 8) == 0) {
> > +             _chrp_type =_CHRP_E5K2;
>
> This whole _chrp_type thing, and having to do different things based
> on the root-node model property, is really only a workaround for
> older machines with inadequate device trees.  Decisions about things
> like which interrupt controller driver(s) to instantiate should be
> taken based on properties in the appropriate device-tree nodes, for
> instance the model and compatible properties in the node(s) for the
> interrupt controller(s).  In fact I'd like to get rid of _chrp_type
> completely.

What are the implications anyway for the bplan board being CHRP vs the
way the rest of the embedded ppcs are set up?  Will having this setup
as a CHRP system conflict w/ non-CHRP embedded boards?  (I'm assuming
that CHRP requires more capable firmware than u-boot passing in a fdt)

>
> > diff -uprN a/include/asm-ppc/mpc52xx.h b/include/asm-ppc/mpc52xx.h
> > --- a/include/asm-ppc/mpc52xx.h       2006-10-25 19:07:48.000000000 +0200
> > +++ b/include/asm-ppc/mpc52xx.h       2006-10-25 19:11:55.000000000 +0200
> > @@ -119,7 +119,7 @@ enum ppc_sys_devices {
> >  #define MPC52xx_SDMA_IRQ_NUM 17
> >  #define MPC52xx_PERP_IRQ_NUM 23
> >
> > -#define MPC52xx_CRIT_IRQ_BASE        1
> > +#define MPC52xx_CRIT_IRQ_BASE        0
>
> What is this going to do to other 52xx users?

Shouldn't be a big deal if all drivers use the macros; but as you
pointed out on IRC, the interrupt stuff needs to be reworked for the
interrupt mapping interface anyway

g.

-- 
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195