uboot-1.1.4 linux-2.6.10: Image bootproblems

[Armin Steck]

Hello,

i have ported uboot1.1.4 for my board.
When i would like to boot linux-kernel-2.6.10 the system hang after decompressing.
can anybody help me? 

Flash: 0x00000000 uboot
       0x00020000 ubootenvironment
       0x00040000 kernel uImage

uImage: gzip -9 < zImage > Image.gz
	/elinux/kernel2.6Richard/Richard/linux-2.6.10/scripts/mkuboot.sh 
          -A arm -O linux -T kernel -C gzip -a 0xa0008000 -e 0xa0008000 -n
          'Linux-2.6.10' -d Image.gz uImage

U-BOOT output:
RAM Configuration:
Bank #0: a0000000 32 MB
Flash #0: 00000000 16 MB
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot: 1
uboot==> bootm 0x00040000
## Booting image at 00040000 ...
   Image Name:   Linux-2.6.10
   Image Type:   ARM Linux Kernel Image (gzip compressed)
   Data Size:    756009 Bytes = 738.3 kB
   Load Address: a0008000
   Entry Point:  a0008000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

Uncompressing Linux................................................... done, booting the kernel.

69052D06:0000001B:00001078          #Kernel-Debug-Information
A00DC914-A0259594>A0008000
A0259594


-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer