fialing @ executing /sbin/int in main.c

[Abdul Rahaman]

Hi All,

        Iam trying to port linux on an mpc8xx processor. Iam using 2.6.10 kernel and busybox 1.0.0.The system is booting up but its failing at the "init".For some reasons it says Kernel panic - not syncing: No init found.  Try passing init= option to kernel.

 <0>Rebooting in 180 second

Pls check below the entire text.

Linux version 2.6.10  (gcc version 3.4.1) #83 Wed 

 

Nov

22 16:02:46 IST 2006

On node 0 totalpages: 8192

  DMA zone: 8192 pages, LIFO batch:2

  Normal zone: 0 pages, LIFO batch:1

  HighMem zone: 0 pages, LIFO batch:1

Built 1 zonelists

Kernel command line: console=ttyCPM,38400=console=ttyCPM debug root=/dev/ram0 rw

PID hash table entries: 256 (order: 8, 4096 bytes)

Decrementer Frequency = 495000000/60

m8xx_wdt: wdt disabled (SYPCR: 0xFFFFFF88)

Warning: real time clock seems stuck!

Console: colour dummy device 80x25

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 29592k available (1572k kernel code, 360k data, 92k init, 0k highmem)

Calibrating delay loop... 261.12 BogoMIPS (lpj=130560)

before dcache_init

after dcache_init

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Before SysFs_init

After SysFs_init

After init_rootfs

after init_mount_tree

inside proc_root_init

after proc_misc_init

checking if image is initramfs...it isn't (no cpio magic); looks like an initrd

Freeing initrd memory: 746k freed

after SK_Init

before register file system in sockets

after register file system in sockets

after kernel mount in sockets

NET: Registered protocol family 16

JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.

Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)

Serial: CPM driver $Revision: 0.01 $

ttyCPM0 at MMIO 0xf000a80 (irq = 20) is a CPM UART

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered

RAMDISK driver initialized: 4 RAM disks of 8192K size 1024 blocksize

loop: loaded (max 8 devices)

elevator: using anticipatory as default io scheduler

mice: PS/2 mouse device common for all mice

eth0: FEC ENET Version 0.2, FEC irq 3, MII irq 4, addr 00:a0:1e:a8:7b:cb

u32 classifier

    OLD policer on

NET: Registered protocol family 2

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET: Registered protocol family 17

RAMDISK: Compressed image found at block 0

VFS: Mounted root (ext2 filesystem).

Freeing unused kernel memory: 92k init

Kernel panic - not syncing: No init found.  Try passing init= option to kernel.

 <0>Rebooting in 180 second

 

I have tried googling,but haven't got any suitable  answer to my problem.Please help,as Iam not able to figure out why the "init" is failing.

 

Sunil

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20061127/719b10a4/attachment.htm