[PATCH/RFC] powerpc: Add of_platform support for OHCI/Bigendian HC

[Benjamin Herrenschmidt]

On Wed, 2006-11-01 at 21:31 +0100, Nicolas DET wrote:

> +/**+	ohci = hcd_to_ohci(hcd);
> +	ohci->flags |= OHCI_BIG_ENDIAN;
> +	ohci_hcd_init(ohci);

Bon, c'est pas mal. Le seul truc ici, c'est que je prefererais que
big-endian ne soit pas hard-code comme ca mais depende du device-tree.
Ce code doit pouvoir etre re-utilise pour des implementations
little-endian.

> +	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
> +	if (retval == 0)
> +		return retval;

Pourquoi IRQF_DISABLED ?

> +module_init(ohci_hcd_ppc_of_init);
> +module_exit(ohci_hcd_ppc_of_cleanup);
> --- a/drivers/usb/host/Kconfig	2006-11-01 09:18:56.000000000 +0100
> +++ b/drivers/usb/host/Kconfig	2006-11-01 21:16:06.000000000 +0100
> @@ -106,6 +106,14 @@ config USB_OHCI_HCD_PPC_SOC
>  	  Enables support for the USB controller on the MPC52xx or
>  	  STB03xxx processor chip.  If unsure, say Y.
>  
> +config USB_OHCI_HCD_PPC_OF
> +	bool "OHCI support for PPC USB controller for OpenFirmware platform"
> +	depends on USB_OHCI_HCD && PPC_OF
> +	default y
> +	select USB_OHCI_BIG_ENDIAN
> +	---help---
> +	  Enables support for the USB controller PowerPC OpenFirmware platform
> +

Je prefererais que USB_OHCI_BIG_ENDIAN soit une option a choisir.

Ben.