BDI 2000 and MPC 8250 Problem

[Mark Chambers]

> I'm experiencing the following error with a BDI 2000 connected to the
> JTAG port on a A&M Rattler 8250 board.  I was wondering if this is a
> hardware problem, or if I have the wrong configuration set up.  The
> following are a telnet session transcript, the BDI configuration file,
> and the register configuration file.
> 
> Thanks
> 
> BDI Telnet Session Transcript (repeats endlessly):
> 
> - TARGET: processing user reset request
> *** TARGET: resetting target failed
> # PPC: unexpected response from target
> - TARGET: target will be restarted in 10 sec
> 
> rattler8250pci.cfg:
> 
> ;bdiGDB configuration file for rattler
> ; ------------------------------------------------------
> ;
> [INIT]
> ;WREG    MSR             0x00001002      ; set up MSR
> ;WSPR    1008            0               ; turn off caches
 === > > WM32    0x000101A8      0x00f00000      ; IMMR == 0xFF000000

Type, or are you setting IMMR to 0xf0000000 ?